Brake bleeding question...Any help would be great.

[Skillet]

I posted about the M/C on this.

Do you have to pull both of the brake lines to bleed the M/C? Very confused on this.

If so, both at the same time or one at a time...

Please, anyone?

 

[cpg]

I dont think you have to but it you mine as well. It would evetually bleed out of a wheel cylinder. Bleed both ports on master then start at the longest line away from the master. You still going to baja?

 

[psfpilot]

I checked the '92 and '97 FSMs, and the Chilton '97-'00 PU/LC/4Runner repair manual. All three implied that both circuits would be bled at the same time.

I bled one at a time by just loosening the fittings while I was flushing the brake fluid a couple of weekends ago. I put ~200 miles on it since then and the brakes seemed to be neither worse nor better than before.

 

[Skillet]

I dont think you have to but it you mine as well. It would evetually bleed out of a wheel cylinder. Bleed both ports on master then start at the longest line away from the master. You still going to baja?

Thanks!

Yes on Baja, leaving next Thursday, if I can get this brake issue ironed out, that is.

Wanna join us? Always looking for another car tag along.