I found a company called TLC Concepts that sells a frame Box Kit that fits where the frame isn't originally boxed. My problem is my mid-frame inner channel is rusting in some areas. The area that concerns me most is the bottom of the channel where the leaf spring hanger mounts (Front of rear leaf,driver's side).
I currently had the outside of the mid-frame skinned with 1/8" steel mig-welded in place because of thin spots in the frame.
I have an idea to remove the existing,damaged inner channel and replacing it with 3/16" steel plate (or channel). Have any of you tried this?
I know some of you suggested a new frame. That's probably not a bad idea but it seems more labor-extensive and expensive than replacing the existing damaged areas. Any ideas? ???
I currently had the outside of the mid-frame skinned with 1/8" steel mig-welded in place because of thin spots in the frame.
I have an idea to remove the existing,damaged inner channel and replacing it with 3/16" steel plate (or channel). Have any of you tried this?
I know some of you suggested a new frame. That's probably not a bad idea but it seems more labor-extensive and expensive than replacing the existing damaged areas. Any ideas? ???