Blue Sea 7622 question.

[ScubaJon]

Did your blue sea 7622 come with bare wires or a plug for the small wire loom coming out of it ?

In almost all pictures it shows bare wires the one I got was supposed to be new but it strangely came in a ziplock and the remote switch was in bubble wrap. I think I may not have gotten a new one.

And the plug looks like this.

 

[hoser]

7622 comes with tinned wire.
7622100B comes with a Deutsch DTM connector

ML-ACR Heavy Duty Automatic Charging Relay 12V [Bulk] - Blue Sea Systems

 

[ScubaJon]

thanks for that info.

Now to figure out what pin is where and how many lol. I did not see a schematic on that page. off to search

 

[Skidoo]

You could go to the link hoser provided and poke around a little and find the wiring diagram.

 

[ScubaJon]

Did you see an actual diagram showing the pin outs of the plug. I did not.

You could go to the link hoser provided and poke around a little and find the wiring diagram.

 

[Skidoo]

Did you see an actual diagram showing the pin outs of the plug. I did not.

I saw a wiring diagram showing wire colors and function, but not pinouts. From the photo you posted guessing you could figure pinout from which color went to which pin.

 

[hoser]

In the instructions...

 

[ScubaJon]

ya and where is the pin outs for the plug in the original picture. I know it says what each wire is but there is nothing showing what wire is in each pin of the plug. Its not a problem I just used a multi meter to find them.

thanks for the help got it covered.

In the instructions...

View attachment 1703369

 

[hoser]

The original picture is a female connector. The connector pictured at the bottom of my post #7 is a female connector. Is that not correct?

 

[ScubaJon]

I guess I failed to see it.

Now its clear as day lol. Thanks.

The original picture is a female connector. The connector pictured at the bottom of my post #7 is a female connector. Is that not correct?