BJ42- Do I really need this??? (1 Viewer)

[CATSQSHR]

I'm converting my tub to a Aqualu, and I can't figure this thing out...
All three lines from the tank go in, then though a check valve, they ran back and forth under the original tub then into a rail under the tub but don't lead any where. Can't find any info on this thing, any help would be appreciated.
THANKS

 

[corglass]

the pipe that enters the tub is a breather pipe and only goes there to hold the pipe. The fumes then enter the channel in the tub.

It doesn't lead anywhere, just terminates about 2" inside the channel

 

[CATSQSHR]

the pipe that enters the tub is a breather pipe and only goes there to hold the pipe. The fumes then enter the channel in the tub.

It doesn't lead anywhere, just terminates about 2" inside the channel

Thanks-Corglass, so i can just end it somewhere under the tub and call it "good" but i should keep the check valve?

 

[DEADSALT]

why three lines from the tank?, i'd like to know as well.

I imagine the check valve does two things; vents tank pressure to atmosphere and prevents diesel leakage in roll over.
So yes, i plan on putting the 'check valve' back on.

 

[CATSQSHR]

three lines from tank, thats got me stumped, but they lead to one, so i'll reinstall that "thing of a meh jigger" and end the line under the body somewhere