Bigwapiti's 2011 Tundra build...'Big Nambe'

[bigwapitijohnny]

All,

Well it's been over 3 months since I changed vehicle platforms. As you know I had a 3generation 4runner that was an exceptional vehicle. This rig owned me nothing because it was an excellent vehicle that served my family for 10 years and 170,000 miles. I'll always have fond memories of this vehicle not only for the years and miles, but also for the introduction to overlanding...

Anyway, here is one last pic of the rig on the way to the dealership...Farewell my old friend

​

Why the platform change? It boiled down to 2 things: room and power. In early May, my son and I participated in a Central Overland rally. It became obvious that the V6 was underpowered in hilly terrain. Our route took us through the Buffalo River in Northern Arkansas, and some of the passes were steep. Nothing compared to passes out west, but it was enough to make me aware and concerned that the rig was struggling...We had 2 in the rig towing a loaded Outlander Sherpa II (10 gallons of fuel / 15 gallons of water / food in the engel 45 for 2 days...).

​

​

I did consider a Land Cruiser 100 and 200 series, however, I really missed the utility of a pick-up. My previous rig before the 4runner was a pre-Tacoma p/u, and after consulting with my wife (CFO) I called my auto broker and was able to get a GREAT deal on a Toyota Tundra...

Here it is. 2011 Tundra CrewMax / 4x4 / 5.7L ~ 381 hp / 401 ft/lbs of torque. My broker lined up a great price for my rig and a great price on the Tundy. I found a tundra grade with a sunroof / upgraded stereo with BT technology / backup camera and some other stuff...Most Tundys with this setup retailed for 10K-12K more...:wings:

Anyway, on to the pics...

​

​

​

I sold my Wet Okole seat covers and ProComp wheels seperately, and I have some money...Let the mods begin...

Regards,

BWJ

 

[bigwapitijohnny]

Tire sizes...

All,

I have narrowed the tire sizes for big Nambe down to 2 possibilities. I don't want to go too big because it is my DD. Currently, the size wheel that came from the factory was 255/70r18. I really got a great deal on a set of new 17" TRD wheels, and I am going to get these laced with bigger tires ~ preferably a 33" tire. The TRD wheels come standard on the 'Rock Warrior' package with BFG AT (285/70r17 ~ 32.71" diameter / 7.85" width). Here is a pic of 'leveled' RWs with the factory wheels / tires and mild lift. **Alot of Tundra owners are going with a spacers up front and 1 inch blocks in the back. I will be going with heavy duty adjustable coilovers up front and add-a-leafs in the rear eventually.

​

​

I would like to fill the wheel well a little more with either 295/70r17 or 285/75r17...I was not able to find pics of a RW with 295s on 17" wheels, however, I did find a Tundra running 295/55r20 (32.78" diameter / 6.39" width) of which, the 295/70r17 (33.26" diameter / 8.12" width) would be 1.48% bigger. I do prefer to have a little more sidewall than the 20" rim would afford me...

​

​

Here is a pic of 285/75 (33.83" diameter / 8.42" width) which is 3.83% bigger than the stock 285/70 size.

​

I had a set of Bridgestone Dueler Revo 2 in 265/75r16 on my 4runner. They were the p-rated and I thought that they were wearing faster than I had wanted. I didn't know if these were going to make it to 50,000 miles which was the warranty on them. So, I will try Nitto Terra Grapplers this time in an LT tire instead.

​

Anyway, if you have some additional insight into the tire / wheel madness, chime on in!

Regards,

BWJ

 

[bigwapitijohnny]

Camper shell...

All,

I have been mulling around on various shells for the rig. Due to the shorter box dimension of the CrewMax, I am trying to utilize the shell as efficiently as possible.
Cab high or higher? - I have decided to go with the cab high at this point. I have had a Leer crown series about 20 years ago on my first P/U, and I really liked it. Some say that it will look like a Sequioa, but you tell me if it does after the build is complete :Wow1:...

Here are some pics of some offerings that I was looking into available for the Crewmax configuration.

​

​

I am also going to go with side tool boxes instead of a custom drawer system. Here I will be able to store tools, winching supplies, etc…I am going to try to get the interior of these boxes sprayed with black Ameraguard bedliner.

​

​

I am not a fan of the Windoor option. Instead, I am considering a fiberglass door painted black to give it the look of a window. The inside of the shell / tool boxes will look like this. I don't think that these boxes will be too restrictive in terms of visibility. I don't think that this space will be missed considering my needs for cargo space with the Sherpa II...

​

My vision is to incorporate a rack system for the shell. My needs for a rack system would be one that is low profile, strong, and modular. Several options for racks are available. I did have a Bajarack on my 4runner and really liked the utility of it. I'm looking into their more 'flat' style racks as compared to the mule style that I had. I am looking to mount at least an awning, Fiskars shovel, etc...

​

Another possible option is the Front Runner rack system. Props to TomesD for these pics ~ Albeit his rig is a Taco DC short bed. I have a PM out to him about the specifics of his solution. Thanks TomesD! I am intrigued with this option, and I have already been on the phone with Paul May at Equipt inquiring on this rack system...

​

​

​

Anyways, stay cool out there and have a great day!

Regards,

BWJ

 

[bigwapitijohnny]

Camper shell...

multiple post...

 

[bigwapitijohnny]

Camper shell...

multiple post...