SOLD Atlanta, GA: 4-speed and T-case (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

jesus888

SILVER Star
Joined
Feb 4, 2013
Threads
83
Messages
1,077
Vehicle Model
  1. 40 Series
Location
Atlanta, Georgia United States
I have a 4-speed with attached t-case that I purchased… I can twist output shaft about 1” in either direction with my hand (not seized) and the transmission shifts in all 4 gears + reverse. Setup is untested on a rig but should be fine.

$450 + shipping if you wanna pay it 🤣

IMG_4344.jpeg


IMG_4343.jpeg


IMG_4342.jpeg


IMG_4340.jpeg


IMG_4341.jpeg
 
a few pics with the top cover off the transfer and the transmission would help the sale
do you have the missing bolts for the transfer to trans?
 
a few pics with the top cover off the transfer and the transmission would help the sale
do you have the missing bolts for the transfer to trans?
I don't have any missing bolts that you mention... if the setup doesn't sell locally as it sits, I may remove the top covers, but I'm not in any hurry since it's cold outside :)
 
Here’s the empty holes for the missing bolts.
When it warms up it would be good to take the top covers off the transmission and transfer case as said above and inspect the inside.
Good luck with the sale, should be easily worth your price. John
IMG_1015.png
IMG_1015.png
IMG_1014.png


IMG_1015.png
 
@pardion posted pics of where the bolts are missing,
I thought I had a good setup years ago until I pulled the top cover off and the parts of the gears above the oil level were rusted
 
Well you got me curious and I was looking for a reason to step away from my computer. Wasn’t as much of a pain in the ass as I thought…

I don’t see any rust inside of either.

IMG_4366.jpeg


IMG_4367.jpeg
 

Users who are viewing this thread

Back
Top Bottom