ARB bullbar Problem (1 Viewer)

[PeterUSA]

There you go, Dobinson is another option. There is a vendor here that gives discounts to mud members..... I think.

View attachment 2814984

Dobinsons Direct

Dobinsons Direct

www.dobinsonsdirect.com

I'm going to have the ARB cut to size.
I'll post pics when it's done.
Thanks!

 

[MikeNBots]

I had a similar problem with my MCC bar. Rather than trim the bumper we trimmed a 1/2" off the body under the turn signals (where it was interfering) and put a pinch weld on it. This is the best photo I have at the moment because it is yet again in the shop with a cracked radiator and a dead clutch master cylinder.

 

[PeterUSA]

I had a similar problem with my MCC bar. Rather than trim the bumper we trimmed a 1/2" off the body under the turn signals (where it was interfering) and put a pinch weld on it. This is the best photo I have at the moment because it is yet again in the shop with a cracked radiator and a dead clutch master cylinder.
View attachment 2852688

How did you find a snorkel kit for it?? I've been looking.... With 0 results.
I'll post pics of my ARB.. I cut the wings.. And it fits great. Pics by weeks end

 

[MikeNBots]

How did you find a snorkel kit for it?? I've been looking.... With 0 results.
I'll post pics of my ARB.. I cut the wings.. And it fits great. Pics by weeks end

I wouldn't say it's a kit so much as it is a snorkel for another application that was modified to fit. One of the local shops here in Gaborone found it and fit it for me. I can try to find the brand and model if you are interested.

 

[PeterUSA]

I wouldn't say it's a kit so much as it is a snorkel for another application that was modified to fit. One of the local shops here in Gaborone found it and fit it for me. I can try to find the brand and model if you are interested.

We'll talk... I don't think there's one for this model so anything close will need modifications. What size engine do you have?.
I'm a 3.0 tdi.

 

[Roastchestnuts]

Hey @PeterUSA Did you ever get your bumper from arb? if so how did it look when they cut it down? I am thinking about purchasing one but May just cut it myself.