Anyone? - CLC Classifieds thread (1 Viewer)

[offr0adlim0]

After adding the High Mileage 100 and a Sienna to the fleet it is time to thin the herd and the LS430 is looking for a new home.

2004 Non-Nav with 196k miles Black on Black

Timing belt, radiator, radiator hoses, condenser, belt tensioner, belt and idler pulley done at 153k

Front pads and rotors replaced at 165k

New lower control arms

New lower ball joints

New alternator and Battery

18” OEM Wheels with newer Tires that have 6k miles on them

Custom JDM Full LED taillights. Someone shelled out big money back in the day for these.

Grom Bluetooth for Music and Handsfree calling

All door speakers replaced

All door lock actuators have new motors and function

Known issues below:

Has new OEM Hood but has not been painted yet. Front of driver side fender needs body work and then paint. Front bumper and roof could use paint at the same time as well.

Driver side seat bottom is torn

Needs new tint on the passenger side windows or remove tint from the remaining windows

Dash is bubbled up, seems to be normal for a black interior has a dash mat that covers most of it

Engine light comes and goes for Torque converter clutch solenoid. Currently it’s off and has not been on the last 4 months or so. Has new OEM solenoid installed but light still comes on from time to time. Shifts and drives fine.

Has been sitting since early December and has developed an oil leak. May just be the valve cover gaskets or a vvt solenoid. Have not had time to drive it to the shop to investigate.

I’m flexible on price with known issues. Would rather it being driven by someone vs sitting in my driveway as it’s a great car. Currently using the 100 Series Land Cruiser as my new driver.

BONUS:
Comes with a 2005 LS430 for parts with 240k miles. This one is a parts car and used as such. Transmission and a few interior bits were not in it when I purchased it but is still complete aside from that. Was going to use the engine for a UZ swap but I need to concentrate on getting my LS swapped 80 back together.

$5500obo

 

[offr0adlim0]

After adding the High Mileage 100 and a Sienna to the fleet it is time to thin the herd and the LS430 is looking for a new home.

2004 Non-Nav with 196k miles Black on Black

Timing belt, radiator, radiator hoses, condenser, belt tensioner, belt and idler pulley done at 153k

Front pads and rotors replaced at 165k

New lower control arms

New lower ball joints

New alternator and Battery

18” OEM Wheels with newer Tires that have 6k miles on them

Custom JDM Full LED taillights. Someone shelled out big money back in the day for these.

Grom Bluetooth for Music and Handsfree calling

All door speakers replaced

All door lock actuators have new motors and function

Known issues below:

Has new OEM Hood but has not been painted yet. Front of driver side fender needs body work and then paint. Front bumper and roof could use paint at the same time as well.

Driver side seat bottom is torn

Needs new tint on the passenger side windows or remove tint from the remaining windows

Dash is bubbled up, seems to be normal for a black interior has a dash mat that covers most of it

Engine light comes and goes for Torque converter clutch solenoid. Currently it’s off and has not been on the last 4 months or so. Has new OEM solenoid installed but light still comes on from time to time. Shifts and drives fine.

Has been sitting since early December and has developed an oil leak. May just be the valve cover gaskets or a vvt solenoid. Have not had time to drive it to the shop to investigate.

I’m flexible on price with known issues. Would rather it being driven by someone vs sitting in my driveway as it’s a great car. Currently using the 100 Series Land Cruiser as my new driver.

BONUS:
Comes with a 2005 LS430 for parts with 240k miles. This one is a parts car and used as such. Transmission and a few interior bits were not in it when I purchased it but is still complete aside from that. Was going to use the engine for a UZ swap but I need to concentrate on getting my LS swapped 80 back together.

$5500obo

View attachment 3829553

View attachment 3829554

View attachment 3829555

View attachment 3829575

Now $5k I’m out of space in the driveway

 

[jynx]

I'm trying to find a full set of flares for an FJ80. 91-92 is ideal, but i think some later models would work. White is the color of choice, but im not opposed to painting them.

Thanks in advance

 

[MSLX]

I had no idea this forum existed - LX200inAR pointed me to it. I'm Joel, I live in Oxford. I am selling my 'farm' in Batesville and losing a sh!t ton of storage space. I just threw these into the main classifieds section, figured I would here as well. I have a set of 20" factory wheels off an '08 LX with Nitto Terra Grapplers (285/50/20) on them (no TPM's). I also have a set of chrome 16" factory wheels off an '01 LX (chrome is beat up). I probably have a complete roof rack for the LX version of the 100 series and definitely a full rack from an '11 LX (although I think I busted 75% of the caps removing them). I have a fully functioning drivers seat out of an '01 LX that needs to go to the upholstery shop. If anyone has a need for any of it - let me know, all you have to do is come and get it. joel

 

[Papalud]

Selling my wife’s 4runner. 2016 SR5 4x4. 154,000 miles, 3rd row, cloth seats, brand new front brakes and rotors from 49tire. Everything is stock. Southern truck bought from a Toyota dealer in Montgomery with 74k. Runs great. Only issue is sometimes rear camera doesn’t engage. Other than that it’s a great truck. $22,000. Email me questions info@blaylockphoto.com

 

[Franken470]

ISO a running 3FE motor if y’all know of anyone, my buddy bought a 62 to be his sons first truck and the head gasket was blown, head warped and needs a bore over as well.. would rather find a decent swap due to cost and timing at this point. Reach out if you have or know anyone. 601-572-1006

 

[offr0adlim0]

ISO a running 3FE motor if y’all know of anyone, my buddy bought a 62 to be his sons first truck and the head gasket was blown, head warped and needs a bore over as well.. would rather find a decent swap due to cost and timing at this point. Reach out if you have or know anyone. 601-572-1006

Eric says he will sell the one from his 80.

 

[fountainhead]

Anyone need a like new zero turn? I bought this around July 2020 and never really used it (I bought a 72” at the same time and use it exclusively). We put a little over 47 hours on it mostly at CT’s and Ginny’s dad’s farm. Outside of that, it’s been stored in my shop since new. I’ve got a brand new set of spare blades and belts to go with it. Was gonna list it here for a couple of days before getting someone to list it on marketplace.

$8000

 

[fountainhead]

A few more pics…come out to the house to check it out and I’ll let you test it out for 3 - 4 hours for no extra charge.

 

[offr0adlim0]

Anyone need a like new zero turn? I bought this around July 2020 and never really used it (I bought a 72” at the same time and use it exclusively). We put a little over 47 hours on it mostly at CT’s and Ginny’s dad’s farm. Outside of that, it’s been stored in my shop since new. I’ve got a brand new set of spare blades and belts to go with it. Was gonna list it here for a couple of days before getting someone to list it on marketplace.

$8000

View attachment 3893916

View attachment 3893917

View attachment 3893918

View attachment 3893919

View attachment 3893920

That’s a smoking deal for someone. Solid machine and some have racked up 10k hours

 

[wngrog]

I have a set of 5 33x10.50-15 BFg KM on welded fj40 steel wheels.

Tires have over 50% tread.

I was using them on a truck I just sold.

The wheels cost $850 for a set of 5 now so my price is based on that.

$900 for wheels and tires.