Got the flywheel at the machine shop rignt now and they can't find any info on an F engine flywheel step.
Poser said is was 15 mm but said he had his turned at 14mm. Guy at the shop measured the current step on the flywheel at it came out to be 16.01 mm and he's not comfortable going 14mm.
Anybody got a manual that tells what the step should be. My flywheel is pretty worn so I'd rather go by a published clearance.
Haynes gives the runout but not the step.
Poser said is was 15 mm but said he had his turned at 14mm. Guy at the shop measured the current step on the flywheel at it came out to be 16.01 mm and he's not comfortable going 14mm.
Anybody got a manual that tells what the step should be. My flywheel is pretty worn so I'd rather go by a published clearance.
Haynes gives the runout but not the step.
