Andy's SLOOOOW 2011 200 Series Build (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Mounted up the NAV and radio gear today. Used RAM mount stuff based on the passenger seat mount bolt.

Went with an 8” android tablet so i could use BC Navigator.

Radio is an icom 2730a. Control head is up front, main unit is mounted to drawer system in rear.

Gonna play around with it and see if i don’t need to also extend the mic and route from under seat so it’s not in the way.

02F14296-0CE0-493F-B9CF-4DEC32C4F48F.jpeg


83467B5B-062D-44CF-B674-51910BA81763.jpeg


C071E610-CB7B-4A4C-AF6D-7A9E2180CB8A.jpeg


DB3780CA-442C-4660-9BC2-C441D9F6E249.jpeg


2C379630-824C-4229-BE81-DF8BCAEBF72E.jpeg
 
Finished up all the electrical this weekend. Wired in 12V and USB receptacle in cargo area for fridge and kids tablets.

Also ran an always on direct wire USB port wire to the front for the NAV tablet.

Dropped the fridge in, and short of an attic rack pretty much done inside.

74FD3C28-8A32-48D7-93C5-22B80E946B72.jpeg

8B3820BC-6526-439A-BD69-A813DA15E680.jpeg

A14A1C3E-8BBC-4C80-BF42-55E065340CB0.jpeg


3965E78D-E230-400A-9547-479C6478F3DE.jpeg
 
#1 right back at ya! ;)
 
Lift went on the 200 today. IronMan FCP. Wound up getting 3” over stock, which was more than anticipated.

Sliders already in hand will go on soon. Gotta make decision on tires.

Thx to Nolen and Jerry for all the help. Actually i was the helper...thx again guys.

Best before and after i have is below.

6771DAFF-405A-49BA-93B4-3F7C52717A1F.jpeg
7485FCBF-1F82-453B-A6BC-2861F7265EBE.jpeg
6F6AC241-EB5C-4A83-9B2F-EF3AB475EC25.jpeg
 
Man, this is not helping the 200 want. Looks awesome!
 

Users who are viewing this thread

Back
Top Bottom