Alpha Overland EDC Kits - York OBA

[flexy flatty]

Paid in full. Thanks

 

[adventr]

Everything *finally* came in today, and I can get the rest of these things out of here! I'll update with tracking info tomorrow.

Also, I'm putting together a little pictorial on how to install these, and what it should look like when installed. They're easy to install, but pics can't hurt anything.

Thanks a TON for being patient!!



On a side note, I'll be curious to see what you all come up with for your plumbing. I'm in the process of doing just that on my personal rig, and WOW, that's quite the task. Be sure and post up some pics if you can!

Sent from my iPad using IH8MUD

 

[zembalayan]

Tim, I've done a bit of research relating to nixing or relocating the PAIR valve. My preference would be to keep it and relocate ala a one off relo bracket and fabbed tubing and flanges, all of which would be copies the stuff that came with the pre-1995 TRD supercharger kits for the 1FZ. I am sure there would be near nil for actual demand but if you had anything on the drawing board or a prototypical thing going on, I would be all ears. Seems not too difficult, but well, I know how that goes.

Thanks again. Psyched to get the kit.

Also, assuming that you'll send tracking via PM or PayPal, right?

 

[jdlsantos]

Paid in full. Thanks

 

[40TUDE]

So have these been shipped?

 

[ngrich99]

I know tomorrow is always a day away, but where we at on shipping these?

 

[Stainlessdoctor]

To the best of my knowledge Tim got these shipped out before he headed up to Moab for the week, he will be posting an update on here soon...but you guys should be seeing them any day and some may already have them...please post on here when you have received them and your install pics!

Thanks,

Stainlessdoctor

 

[ngrich99]

Just anxious, thanks for the update, hope to see it soon.

 

[scotia]

Wheres the beef? It just showed up today and the beef is all in that bracket. May have to counter balance that with some weight on the DS of the engine. Looks great and better than expected.
Any thoughts on wear life with the groove closest to the engine. Looks a tad thin there on the edge. Will post pics when installed as requested.

Thanks fellas.

 

[Stainlessdoctor]

Wheres the beef? It just showed up today and the beef is all in that bracket. May have to counter balance that with some weight on the DS of the engine. Looks great and better than expected.
Any thoughts on wear life with the groove closest to the engine. Looks a tad thin there on the edge. Will post pics when installed as requested.

Thanks fellas.

That is machined from 60 series aluminum, I have had mine installed for a while and it all works great...I feel confident the pulley will outlast as many rubber belts as you can put on there.

Glad it arrived today!

Can't wait to see pics of it installed!

 

[rocktoy74]

Got mine today too! Looks like It Is built to last! I am exhausted so I will have to save this for another day, but I am really excited about jumping In and getting It Installed! I have It all planned out In my head! Gonna run stainless air lines back to a 2.5 gallon tank, just like I had In my 40! Look forward to see others plans too! Thanks again for a great and super functional product! Worley

 

[newtomelx]

Got mine a little earlier today and wow, very nice. Cannot wait to get it installed, but work is hectic so will have to wait some. Kudos to the two of you for stepping up and producing a great product that is fit for the LC rep!!

 

[adventr]

Sorry about the delays! All remaining brackets were boxed up and handed off to shipping before I left town, and it looks like several of you have began to receive. Let me know if you guys have any questions.

I used my personal kit twice a day in Moab this past week, and its amazing to be able to air up so fast. I'll warn you though, you'll be using it a lot more if your wheeling buddies find out you have it... Lol

Sent from my iPad using IH8MUD

 

[zembalayan]

Sorry about the delays! All remaining brackets were boxed up and handed off to shipping before I left town, and it looks like several of you have began to receive. Let me know if you guys have any questions.

I used my personal kit twice a day in Moab this past week, and its amazing to be able to air up so fast. I'll warn you though, you'll be using it a lot more if your wheeling buddies find out you have it... Lol

Sent from my iPad using IH8MUD

Sounds like a great trip! I have not received anything yet here in SF. I PMed you and StainlessDoctor and e-mailed him as well. Looking forward to receiving the bracket kit soon or more information RE shipping of the same. Thanks!

 

[Mbridenour]

Got mine today... Phoenix. Can't wait to get this bolted on.

Sent from my iPad using IH8MUD

 

[Mbridenour]

Anyone else have a problem with the belt not fitting your air compressor the belt included was to short
Guessing pulley size on these comp must differ

Sent from my iPad using IH8MUD

 

[scotia]

Think your clutch pulley should be 6" dia version

 

[Mbridenour]

39 belt worked but tight 40 was to long

Sent from my iPad using IH8MUD

 

[Mbridenour]

Belt and tensioner right up against small coolent

Sent from my iPad using IH8MUD

 

[scotia]

I see a problem now