Hey everyone.
I just installed Airbagman ( 2" taller Airbags) in the rear. I have the passenger side sits1" higher than the driver side. ( I HAVE HAD THE PROBLEM EVEN BEFORE INSTALLED The new/taller Airbags).
It should be noted that in order to get the rear end lifted by using the taller Airbags, spacers/washers should be place between the frame and height control sensor bracket .
Therefore and since the car leaned over the passenger side even after installing the new airbags , I still have the lean.
Therefore, I put more washers on the driver side than the passenger ( i still have the problem.
Pic shows the spacer.
Passenger side
Driver side ( double spacers)
I then adjusted the nut on the arm of the sensor ( see the pic ) by put it all the way to the bottom and top and I still have the problem. And I still have the passenger side sits higher.
I don't know what to do next.
Should I change the sensor?
I just installed Airbagman ( 2" taller Airbags) in the rear. I have the passenger side sits1" higher than the driver side. ( I HAVE HAD THE PROBLEM EVEN BEFORE INSTALLED The new/taller Airbags).
It should be noted that in order to get the rear end lifted by using the taller Airbags, spacers/washers should be place between the frame and height control sensor bracket .
Therefore and since the car leaned over the passenger side even after installing the new airbags , I still have the lean.
Therefore, I put more washers on the driver side than the passenger ( i still have the problem.
Pic shows the spacer.
Passenger side
Driver side ( double spacers)
I then adjusted the nut on the arm of the sensor ( see the pic ) by put it all the way to the bottom and top and I still have the problem. And I still have the passenger side sits higher.
I don't know what to do next.
Should I change the sensor?
Last edited: