Air compressor switch to fit the dashboard cutout

[GeorgeN]

Hi guys, do you know a switch that fits the smaller cutouts that are in the left hand side of the steering wheel? The arb style switch is larger and I would prefer not to trim the mounting panel.
I don’t care if the button has a different logo or even if it’s not backlit. I just need it to fit and work.

Thank you!

 

[Tex68w]

AOB makes the best one to match the factory switches in look and color but I am not sure if they make one that works with the LC.

These definitely work with the LC, but it all depends on which series/year model you are talking about here.

CH4x4 Push Switch for Toyota – Air Compressor Symbol – CH4X4 Industries

www.ch4x4.com

CH4x4 Push Switch for Toyota – Air Compressor Symbol – CH4X4 Industries

www.ch4x4.com

 

[GeorgeN]

Thank you Tex68w! I’m installing it in my 2008 LC. I don’t see the 200 series listed in the links you included, I assume it still works right? I see the 100 listed, it’s probably the same size.

 

[Tex68w]

Thank you Tex68w! I’m installing it in my 2008 LC. I don’t see the 200 series listed in the links you included, I assume it still works right? I see the 100 listed, it’s probably the same size.

I would assume so as these blanks and switches go way back in the Toyota lineup. I would message both vendors and inquire before buying. I am putting one from AOB in my 4Runner until I put a Switch Pros 9100 in. Make sure you get one of the mini add-a-fuse pigtails to fuse the switch and tap one of the other switches near it for dimming capability.

 

[Markuson]

Here’s mine....but having trouble tracking down where I ordered it. There are a ton available though.
Like a zillion to choose from.

In the dark...

 

[sleak]

I got mine for my '16 from CH4X4, but you have to get the "Toyota Small Push Switch." They have a lot of cool (useless) graphics available, as well as useful ones.

 

[DPA200]

I’d be curious as well if someone has a link. Looking at installing a arb twin before summer

 

[DPA200]

Looks like CH4x4 has. Thanks @sleak

 

[Tex68w]

Here is what I put in the 4Runner, it is a Toyota color matched switch that dims from AOB. I plan to install the Switch Pros 9100 and I will run it off of that switch system at that time. I will install the 9100 when I get around to buying a front bumper, winch, and dual batteries at some point later in the year.

 

[GeorgeN]

Thank you guys I ordered the one @Tex68w suggested. I ended up ordering form amazon to expedite it.