Aftermarket Light Planning (1 Viewer)

[dannyvp]

I'm in the planning process of adding lights under the hood, under the rear hatch and front bumper of a 60 series.
Im sure one day, this will lead to another battery(maybe not, who knows). What kind of junction/ power block are you guys using to keep down on extra wires in the engine bay? I would love to see some pictures.

 

[81Red60]

I installed the under hood light system from oddironoffrosd.com. His name on here is gunrunner5. Really good system that took about 15 minutes to install.

 

[Drake2]

@1986blue60 I believe you meant to say oddironoffroad.com

 

[81Red60]

You are correct. Thank you.

 

[NCFJ]

I use Bussman boxes under the hood as a secondary, stand alone fuse/relay block. The model I use has 5 micro relays and 10 fuses. Everything you need to know is in this thread

DIY - Build and install a Bussmann RTMR Fuse/Relay Block

Part 1 - Introduction [IMG] This is Part 1 in a series of tutorials that will show you how to build a Bussmann RTMR fuse/relay block. If you’re not...

www.tacomaworld.com

This double box set up uses one box as a head light control box.

 

[cruiserpilot]

I use Bussman boxes under the hood as a secondary, stand alone fuse/relay block. The model I use has 5 micro relays and 10 fuses. Everything you need to know is in this thread

DIY - Build and install a Bussmann RTMR Fuse/Relay Block

Part 1 - Introduction [IMG] This is Part 1 in a series of tutorials that will show you how to build a Bussmann RTMR fuse/relay block. If you’re not...

www.tacomaworld.com

This double box set up uses one box as a head light control box.

I’d be embarrassed to post a pic of my redneck setup next to this.