I'm just getting around to installing my Witts end OBA kit - and of course one of the ports is facing at a bad angle - anyone know if it's possible to adjust the orientation on a York 210 ?
?
?
Adjust port orientation on a York 210 ? (1 Viewer)
- Thread starter unclegit
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I seem to recall using Teflon tape on the threads which allowed it to seal and line up correctly.
Same.
- Thread starter
- #4
Yea - I've teflon tape on it already and it's still wonky.
Guess I need a 180 or a 90 swivel for it, something like this :
www.summitracing.com
Guess I need a 180 or a 90 swivel for it, something like this :
Earl's Performance AT921108ERL Earl's Performance Couplers | Summit Racing
Free Shipping - Earl's Performance Couplers with qualifying orders of $109. Shop Fittings and Adapters at Summit Racing.
I got all my coupling and line from Pegasus Racing
www.pegasusautoracing.com
www.pegasusautoracing.com
Here's my build, if you've you interesed in how to use the clamps.
forum.ih8mud.com
Pegasus - Keyword Search
Textile Reinforced High Temperature Hose, Blue - Pegasus Auto Racing Supplies
Our textile-reinforced classic Blue rubber hose is designed for use as oil lines where stainless braided hose is not required. Rated to 150C (302F) and 250psi.
Here's my build, if you've you interesed in how to use the clamps.
The Mean Green Bean's OBA thread competed, with numbers.
I'm going to do a dedicated OBA thread for the MGB. I've been futzing about with this since June, still waiting on some back ordered parts, so the urgency hasn't been what anyone would call "on point". That said, I worked on mounting the air tank today. I chose a seamless aluminum tank, 2.5...
forum.ih8mud.com
