a new style of slider for the FJ'C

[RLMS]

To sum it up we were asked by fellow toyota friends, to come out with a FJC slider, so here is what we came up with. Sorry for the poor photos. please let us know what you think about them, I will awnser any ?'s and will be posting them up in the vendor section if we get good a enough response, which we hope to do.
these are in prototype form and hopefully they will be av. soon

thanks guys....and gals!!

Justin

RedLineLandCruisers.com

 

[harm]

Hhmmm, I dont know about these. Maybe if the actual "FJ Cruiser" part was say a cut out instead of what looks like decals,

 

[tddfj]

i agree the fj cruiser name needs to be laser cut out. would look better.

 

[RLMS]

that pic is our display model, we used for the rising sun rally, this last weekend, the actual sliders are planned to be cut with a flo-jet!!!
at least we all agree about cutting out...thanks guys!!

 

[FJCthulhu]

Very nice, can't wait to see the pics of them flo cut and mounted on an FJ!

 

[Beerhat]

I have a few ?'s. what size/kind of tubing is it made out of?
How thick is the plating?
How far are they going to stick out?
What about adding a couple of slots in the plate along the outer tube so you can utilize a hi lift slider adapter tool?

I maybe looking to replace my current sliders

 

[RLMS]

I have a few ?'s. what size/kind of tubing is it made out of?
How thick is the plating?
How far are they going to stick out?
What about adding a couple of slots in the plate along the outer tube so you can utilize a hi lift slider adapter tool?

I maybe looking to replace my current sliders

the tubing is made of 120 wall 1.5 inch, plating is 1/8 steel with tube behind the plating...the length of the legs determines the amount they will stick out. right now we are waiting for another FJC to show up for final fit. Comared to the stock toyota ones they come out to about 2 in farther, but they also contour the body!!!. as for the high lift, what a great idea!! i will be calling my flo jet guy and get on it!!!

thanks guys
justin

 

[phoolio]

looks great! how about a kick out for the rear?

 

[fjteddy]

They look great could you make them with a top plate for easy acces for kid and the older folks. what would be the cost aprox.
Thanks

 

[tddfj]

thase will look great. can you make a set to fit a 2002 tundra double cab 4x?

 

[DBS311]

Were you planning on adding gussets from the tube to the mounting plates?

 

[RLMS]

Were you planning on adding gussets from the tube to the mounting plates?

yes they will have 2 gussets per leg!!! muchhhoooo stronger

 

[RLMS]

thase will look great. can you make a set to fit a 2002 tundra double cab 4x?

we could make a set custom for you if you would like....just give us a call at the shop 719-210-0101 ask for Justin and we can see what we can do for you!!

 

[RLMS]

looks great! how about a kick out for the rear?

if we did do a kick out, the way thay are designed, you would'nt be able to open the back doors

 

[RLMS]

They look great could you make them with a top plate for easy acces for kid and the older folks. what would be the cost aprox.
Thanks

the top of the bar, should be desent for a step, we are going to be doing the final fit here in a couple days, and we'll post pics of how they fit, so you can see if they will work for your application!!

thanks
justin

 

[phoolio]

if we did do a kick out, the way thay are designed, you would'nt be able to open the back doors

i see...so these tilt up high to protect the whole rocker panel...i can already visualize it and i think it is gonna look sweet! it'll definitely give an aggressive look.

 

[RLMS]

i see...so these tilt up high to protect the whole rocker panel...i can already visualize it and i think it is gonna look sweet! it'll definitely give an aggressive look.

thanks, i'm glad you like them!!! on another note this "style" will be our trademark style, pickups and runners are next!!!!

 

[lucky 13]

id like to see these bad boys mounted, to get the full appreciation of them.

 

[RLMS]

id like to see these bad boys mounted, to get the full appreciation of them.

you will, very soon!!!
thanks guys
justin

 

[CRAW]

I can vouch for the design and durability of these sliders, as I saw them this past weekend in Iowa at the Tall Corn Cruiser Classic. Redline are a great couple guys, and seem very willing to go out of their way to please their customers.

It was great meeting you and your co-worker, Justin.