A little help for a newbie (1 Viewer)

[LCtuff08]

2008 LC. Changing shocks and did not keep track of which spring is driver side and which spring is passenger side.
One spring has 3 yellow paint dots and one spring has 2 blue and 1 white paint dots.
Original springs. Can anyone with same or similar model year or tell me which spring is for which side??
Thanks for your help.

 

[Kinnada]

some hearsay (not as good as confirm. from an actual vehicle)

Chi Town 4x4 Company

Your Chicago Toyota Shop!

chitown4x4.com

 

[Kinnada]

RTH - someone with 2016-2021 stock suspension please check front spring paint codes

Hello all, I'm putting some stock take-off suspension onto my 2013 but don't know which side the front springs go on. One spring has three gray dots, the other has one white two blues. Alternately, one of these part numbers was carried over from 2010-2015, so if someone with stock suspension...

forum.ih8mud.com

 

[LCtuff08]

some hearsay (not as good as confirm. from an actual vehicle)

Chi Town 4x4 Company

Your Chicago Toyota Shop!

chitown4x4.com

Thank you Kinnada. That is how I put it back together and there is a 2 inch lean to passenger side. Will try and adjust the KDSS maybe that will do the trick.

 

[bloc]

I was gonna say, the Chitown listing didn't agree with the info I got when I asked the board

 

[Kinnada]

yeah i posted a confirmatory thread after the hearsay post indicating an actual picture with the correct positioning.
sorry it wasn't more clear lctuff08

 

[LCtuff08]

yeah i posted a confirmatory thread after the hearsay post indicating an actual picture with the correct positioning.
sorry it wasn't more clear lctuff08

Kannada and Bloc

 

[LCtuff08]

Kannada and Bloc

Thank you both for your help. Going to swap the springs so 3 yellow dots DS and 2 blue 1 white PS and see what happens. I will post a follow up here in about 10 days as it will be a bit until I can work on the LC again.

 

[LCtuff08]

OK, sorry for the delay in giving follow up. I adjusted the KDSS as per some youtube I watched, it was very easy and it corrected the problem. I believe the springs are in the correct position. Thank you everyone for your help.