Parting Out A Few Remaining FJ60 Parts - NV and NM

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I've got a sub-harness at the evaporator unit, which includes the connector to the AC amplifier. But the evaporator's from my '86 FJ60, the evaporator production date is 4/85 through 8/90. I'll check to see if the sub-harness part number changed at the same time. The sub-harness part number changed in 4/85.

I have a couple more evaporator units in Nevada, I'm pretty sure one is from a 9/84 FJ60, so it would have the correct sub-harness. I'll be out there later this week and can verify.
 
Last edited:
I've got a sub-harness at the evaporator unit, which includes the connector to the AC amplifier. But the evaporator's from my '86 FJ60, the evaporator production date is 4/85 through 8/90. I'll check to see if the sub-harness part number changed at the same time. The sub-harness part number changed in 4/85.

I have a couple more evaporator units in Nevada, I'm pretty sure one is from a 9/84 FJ60, so it would have the correct sub-harness. I'll be out there later this week and can verify.

Darn! Would appreciate if you take a look at the unit in Nevada! Thanks for the quick response!
 
Looking for left rear quarter panel from the wheel arch back and the side window down. Thanks!
 
Do you have a set of front seat belts in grey?
 
Do you happen to have a drivers side seat belt in BROWN? I already have a receiver installed but my retractor is broken.
 
I've got a sub-harness at the evaporator unit, which includes the connector to the AC amplifier. But the evaporator's from my '86 FJ60, the evaporator production date is 4/85 through 8/90. I'll check to see if the sub-harness part number changed at the same time. The sub-harness part number changed in 4/85.

I have a couple more evaporator units in Nevada, I'm pretty sure one is from a 9/84 FJ60, so it would have the correct sub-harness. I'll be out there later this week and can verify.
Well, the FJ60 evaporator in Nevada was missing its sub-harness. But I probably have the connector housings you'd need to build your own.. Can you PM me photos of what you need to connect, both at the evaporator unit and the main harness?
 
Do you happen to have a drivers side seat belt in BROWN? I already have a receiver installed but my retractor is broken.
I have a front retractor in brown, but I think it's for the passenger side. It has R-180 stamped on the back.
 
do you have the front side marker lights?
 
Sure don't, had to buy new from Toyota for my '86 FJ60. They're pretty inexpensive.
 

Users who are viewing this thread

Back
Top Bottom