96 FZJ80 Parting out

[Bowser]

I have a 1996 80 which was rolled hard. The body is shot except for the lower tail gait with few minor dents (two tone silver and grey), right headlight, left tail light, one oem rim, and gold embles. The engine and tranny (125K) where working great prior to the roll and with a little work can still be fired up. Frame is good and so are the axels. As far as the interior (tan leather) much is still in usable condition. Seats are decent but not perfect. If you are looking for all the small interior parts (switches, handles, dash components, etc.) they are here. The drive train is complete. If you are looking for the entire truck or any of the parts I have listed send me an offer and I will get back to you.
Thank you

 

[dhanney]

Flares

Did the front fender flares survive?

 

[4x4CPOSEADOG]

Do you have front mud flaps?

 

[Bowser]

No fender flares survived. It does have rear mud flaps which are fine. It had running boards. The metal is toast but most of the plastic pieces for the running boards are OK.

 

[earabadj]

Any pictures of the seats?

 

[Land Speeder]

I want the center console lid: padded with extra compartment...

How much? and shipped to 36830... thanks!

 

[landcruiserman]

cruiser parts

HI,

I would be interested in factory cd changer and stereo.
Driver seat if in good shape.

Shipping to sherwood Oregon 97140

Thank you
Brian

 

[stayalert]

I need a rearview mirror.....shipped to Norwich, VT 05055......Whadaya say?

 

[OGBeno]

Rear heater switch (center console all the way at the bottom--it is black and has right-center-left positions).

Shipped to 87048.

Thanks.
-onur

 

[knorrena]

I want the whole centre console if you dont want to part it out for the guy above, or the bottom half if its a land cruiser one. I also want the piece of plastic that covers the stereo and houses the avac stuff. Could you pm me with a price?

Thanks,
Karl

 

[bugsnbikes]

looking for antenna and hood/hatch struts. sent pm on struts but forgot antenna query.

thanks,Tim

 

[skunkworks]

Interested in 4 or 5 alloy 16" rims if that is what you have. Also need lower seat portion of the front seats power?. I've lost the power function on mine but my leather is good. Not sure if you are willing to separate or if can even be separated. Ship to is 14304

let me know via PM or manny87zyahoo.ca

Thanks,

Les

 

[badmuthatrucka]

Looking for the door lock control module. Possibly the DS door lock solenoid. Let me know if you still have them, and how much you want for each.

 

[tlc4x]

Did the truck have factory e-lockers?

 

[tclndcrz]

it does not have e-lockers


...just to let you guys know, bowser is a good guy that has been around cruisers and toys for a long time. im looking forward to checking out the truck next week when i get back to montana. i can get some pics for yall then if you need them

 

[4x4CPOSEADOG]

How about the J-bolts, 4 nuts, and the hold bar that secure the battery to the tray? Do you still have them?

 

[riberware]

I need the following parts for my 80 series:

1. US front driver side complete door lamp.

2. US rear driver side step, the rectangular plastic step for the passengers to access the third row of seats.

3. Rear hand brake shoes if they are in good condition.


How much do you want for this parts shipped to Miami FL 33166

My car is a '98 HDJ80 it's pretty much the same as all the US versions that I've seen... rear diff is a full floater, the interiors are in grey leather, etc.

 

[BassTracker]

How about a tan leather steering wheel in good shape?

*EDIT* Dibs on the steering wheel and passenger front door panel.

 

[edr981]

What wheels and tires were you running?

 

[Sighthound]

Passenger side sun visor

I would be interested in the passenger side sun visor if you still have it. Sent you PM