95 Fzj80 leather manual seat foam?

[Fj80oregon]

Tried searching this and can’t find a definitive answer, picked up some manual leather seats and going to replace the foam and reupholster. Does any one have any real world experience with which foam to order? I have Read manual foam wil work and read the power seat foam will work also. Was hoping someone has been down this rabbit hole? Thanks in advance. Maybe @FJ60Cam?

 

[fl4031003]

Buy the foam for cloth seats, Toyota did not offer OEM Leather in a manual seat

 

[Malleus]

The difference in the foam is allowance for the seat control switches.

 

[Fj80oregon]

Buy the foam for cloth seats, Toyota did not offer OEM Leather in a manual seat

Even in other countries? These came out of a Europe spec 80?
Edit just talked with seller and they where in a us truck. Sounds like getting leather was a dealer option back then. So I’ll try and find manual foam not sure if it’s available any more.

 

[fl4031003]

Oh, that was not mentioned in your original post. A picture of the seat would help.

 

[77mustard40]

Even in other countries? These came out of a Europe spec 80?

I can't think its that different, II replaced the DS foam in my cloth seats and it was a massive improvement. Even if you had to trim it a little... 71512-30020

Edit: What part # comes up in Partsouq with your VIN?

 

[Fj80oregon]

Oh, that was not mentioned in your original post. A picture of the seat would help.

I was wrong on that it was a US truck.

 

[Fj80oregon]

I can't think its that different, II replaced the DS foam in my cloth seats and it was a massive improvement. Even if you had to trim it a little... 71512-30020

Edit: What part # comes up in Partsouq with your VIN?

My trucks Leather power, I bought these to gain some leg room with the manual slider.

 

[77mustard40]

My trucks Leather power, I bought these to gain some leg room with the manual slider.

Shout if you need some seat bottom dimensions to compare to your seats, mine’s a 97 US cloth interior

 

[ThreeRidges]

I’m in a related process. 96 with dead leather electric seat gears/switches/foam. I just grabbed a set of 93 manual seats that I will reupholster and swap. Some confusion as to replacement foam bottoms. A thread here on a 93 manual restore quoted 7151 60040 as the part # for passenger, 71512 60020 driver. They are available from a number of vendors. A Toyota part site said those worked for a 93. When I called a Land Cruiser specialty shop that had someone make non-oem replacement manual seat cushions for “90-92” LCs and used those parts #s to describe them, they said they would not fit a 93. So I’m trying to figure out what to order for my seats. Any one use these part #s for 93 or similar manual seats?