Parting Out 88 fj62 part out, drivetrain is gone

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Truck is being stripped down as we speak, I am pulling everything of obvious value but if there are any strange requests I can try to make it happen just let me know asap. If you have asked me for something and I've been putting it off, don't worry I'll save anything we talked about. Feel free to remind me if there is something specific. Left overs are getting scrapped tomorrow so speak now or forever hold your peace!
 
Just remember to keep enough floor so the firewall can stand on its own, just behind the trans hump cover plate should work, call me if you need a hand.

Jeff
 
Ok so you need the entire fire wall from the cowl to the floor and how much of the sides? You want me to just make a generous cut through the inner fender and leave the entire door hinge post? I got the drivetrain out, still some a/c stuff in the way but should be getting it out tomorrow, I'll keep you updated.
 
LAMBCRUSHER,

Here are the pics of the filler neck

Photo on 8-25-15 at 8.34 AM.webp


Photo on 8-25-15 at 8.34 AM #2.webp


Photo on 8-25-15 at 8.34 AM #3.webp
 
STILL AVAILABLE

pics are available on request, already have pictures of everything just too much to post, so ask about something and I will post up the picture.

lower half of rear seat
glass
back hatch
passenger quarter
both driver and passenger rear doors half glass only (the small stationary pieces)
driver's door glass
front rad skid plate
driver's and passenger's door harness (cut at cab and mirror plugs removed) relays still there
hood latch with complete cable and pull knob
fuel door latch/popper complete cable with pull knob
fuel door
quarter vents, driver's side has small crack (ask for pic), still very nice
intake/carb fan (I don't what they call these when it's not carb'd)
fuel vapor separator
a/c control panel
center/ a/c dash bezel including but removable rear wiper switch, antenna up down switch
rear speaker grills kinda rough but could be cleaned up and painted, too cool to throw away
rear washer bag with working pump
door belt moldings, driver's sold
all door handles inner, outer, brown trim pieces and other rods and such just ask
front turn signals
rear heater switch
tool bag bungee
front right corner marker clear
fender amber park light, lens only
plastic ign coil cover
4wd emblem with gasket
rear seat belts, lap belts not, shoulder belts, one retractable is gone, one retractable, middle belt, all 3 female buckles available
2 door check straps
door armrest/handle brown
tcase vacuum switches
mirror switch
dash dimmer switch
various door seals
brown glove box door in good shape
auto brake pedal bucket, with pedal
hood prop rod
overflow tank with hose and good cap
front windshield washer reservoir, cracked cap, no pump
front recovery hook
 
Last edited:
New

Oil pressure gauge?

sorry for asking but I wasn't sure if it was all gone.

thanks

shipped to 93432
-steve
Click to expand...
No need to be sorry, I have it, pretty sure it's the same as my 60 but I'll have to double check. You just want the gauge out of the cluster?


Yes, just the gauge from the cluster.

thanks
 
New

Oil pressure gauge?

sorry for asking but I wasn't sure if it was all gone.

thanks

shipped to 93432
-steve
Click to expand...
No need to be sorry, I have it, pretty sure it's the same as my 60 but I'll have to double check. You just want the gauge out of the cluster?


Yes, just the gauge from the cluster.

thanks

I'm thinking I want to hold on to this for now, I'm going retro fitting the tach and speedo into my 60 so for now I'm going to keep the oil too
 
Back
Top Bottom