Parting Out '83 FJ60 Beaumont, TX

[whateverpratt]

Sorry, I think my notification preferences got screwed up, so I didn't notice your post till now. I do still have the harmonic balancer if you still need it.

 

[Bki7540]

I have a pretty rough FJ60 that I need to get out of my yard. I bought this as a parts vehicle for my 40 project, and I've removed all the stuff I need.
Here's a list of what I took:
the transfer case
driveshafts
front pumpkin
knuckles out off of front axle (replaced with '71 fj40 knuckles out minus the warn hubs)
tie rod (I stuck a piece of rebar in it so it would be easier to move around)
draglink
steering box
steering column (from the box to the steering wheel)

The main thing that's left that's worth anything is the engine and tranny. I was told by the PO that the engine ran (however he failed to get it started the day we loaded it), but that it smoked a little, so it probably could use a rebuild. The body is pretty rusty; the seats are pretty worn; there is a lot of slop in the rear pinion. It's rough.

I do have the title, and I'd like to sell the whole truck. Make me an offer.

P.S. I also have the f155 and three speed that came out of the '71 fj40, if anyone could use that (I'd hate to crush it).

View attachment 1048719 View attachment 1048724 View attachment 1048727 View attachment 1048728

Hey do you still have motor and tranny. The 2 f. If so how much? Also the f155. How much for it?

 

[whateverpratt]

$100 for what's left of the 2F (I'm getting the head pressure checked for someone, so that's probably sold to him). $75 for the bellhousing and 4 speed. $125 for what's left of the 1F and 3 speed. So $300 takes the lot.

 

[LAMBCRUSHER]

if you haven't crushed the rig yet, and the fuel filler neck isn't all chewed up where the cap screws into it, I'd be interested in obtaining the filler neck from you...

 

[whateverpratt]

PM your e-mail and I'll send a picture

 

[Yellow Jacket]

Do you have the gear reduction starter? How much shipped to 19355? Thanks

 

[TX_TLC]

Passenger side rear bumper cap? Passenger side front turn signal? Both Rear turn signals if they are OEM? Blue arm rest?
Shipped up to Abilene. 79602. Thanks in advance.

 

[whateverpratt]

PMs sent

 

[enfield]

Do you have the AC compressor still installed? I need the compressor mount hardware/idler bracket.

 

[whateverpratt]

I should have all those brackets. PM me your e-mail, and I'll send you pics of what I have.

 

[GreyGooseFJ]

What about the AC hoses and drier?

 

[whateverpratt]

I still have those parts. PM me your e-mail, and I'll get pictures for you.

 

[Amohd]

Chrome light bar assembly on rear hatch still available?

 

[whateverpratt]

I sold the entire tailgate. All I have is the window portion of the rear hatch.

 

[fountainhead]

Front DC drive shaft still available?

 

[Stumpalama]

How about the flywheel inspection cover? Is it still available?

Thanks!
Stump

 

[whateverpratt]

Front DC drive shaft still available?

I'm actually holding onto it until my 40 project is done. If I don't end up using it, I'll post it up.

 

[whateverpratt]

How about the flywheel inspection cover? Is it still available?

Thanks!
Stump

Sold that with the bellhousing, flywheel, and clutch.

 

[whateverpratt]

I sold the front doors yesterday. Here's what I still have:
rear doors
top rear hatch
seats (minus upholstery)
dented driverside fender
driverside inner fender
guages
4 speed
2F short block
2F intake and exhaust
2F AC compressor
2F alternator
2F brackets for AC and alternator
2F and 60 misc

I was planning on crushing this much earlier, but things kept coming up that put it off, and people kept buying stuff off of it. I'm definiately going to crush what's left of it by the end of the summer, so if you think you might need something, let me know.

BTW, you guys are awesome. Every person I've ended up selling to has been great.

 

[Stumpalama]

Sold that with the bellhousing, flywheel, and clutch.

That makes sense. Thanks for the reply. Good luck with the rest of the sales.