For Sale 80 Series parts (1 Viewer)

Joined
Jul 31, 2006
Messages
450
Location
Colorado
 
Reduced Prices

80 Series Rear Driveshaft. Rebuilt and balanced by Colorado Driveline Specialists, honestly ran for less than 2000 miles before upgrading to a DC shaft - $150 shipped to the lower 48.



I also a have third row seats in great condition. $50 for local pickup in Colorado Springs.

Thanks,

Adam
IMG_9026.JPG
 
Last edited:
Joined
Aug 10, 2010
Messages
784
Location
Lansing, MI
Thanks, Beno. I'd like, in fact, I need that PS cooler as mine was pinched off in an accident by PO. I'll send a PM and see if it's not too late.

Can I ask Beno how much for a new one for my 97?
 
Joined
Jul 31, 2006
Messages
450
Location
Colorado
 
I was out enjoying the nice weather here in Colorado today so sorry for not responding sooner.

Here are some updates and answers to questions.

For the DC joint, I took some measurements and now I'm not sure what Toyota vehicle it came off of. The bolt pattern is pretty close to 60mm x 70mm which is nothing close to the 80 series. It probably won't work for anyone here so I apologize for the earlier mis-information. I've pulled it from this thread.

As for the rebuilt stock rear drive shaft, it go new joints and was balanced by Colorado Driveline Specialists. Shortly after that I came across a Tacoma DC shaft and had the same shop build me a new rear shaft out of the donor Tacoma unit. They do excellent work, but I no longer need the old shaft.

I'll also respond to the PM's in the order I received them. Looks like a number of them came in this afternoon.

Thanks,

Adam
 
Last edited:

Nay

Joined
Aug 17, 2004
Messages
4,796
Location
Colorado
 
 
 
I was out enjoying the nice weather here in Colorado today so sorry for not responding sooner.

Here are some updates and answers to questions.

For the DC joint, I took some measurements and now I'm not sure what Toyota vehicle it came off of. The bolt pattern is pretty close to 60mm x 70mm which is nothing close to the 80 series. It probably won't work for anyone here so I apologize for the earlier mis-information. I've pulled it from this thread.

As for the rebuilt stock rear drive shaft, it go new joints and was balanced by Colorado Driveline Specialists. Shortly after that I came across a Tacoma DC shaft and had the same shop build me a new rear shaft out of the donor Tacoma unit. They do excellent work, but I no longer need the old shaft.

I'll also respond to the PM's in the order I received them. Looks like a number of them came in this afternoon.

Thanks,

Adam
Did they use Spicer joints or OEM?
 
Joined
Jul 31, 2006
Messages
450
Location
Colorado
 
Price of the rear shaft reduced to $150 shipped to the lower 48.

Rear 3rd row seats still at $50.

Thanks,

Adam
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top Bottom