- Year
- 1978
- Vehicle Model
- 40 Series
Update on price $12,000 12/19/21
In process of moving and not enough time or space and need to let it go.
I have added new OME springs, 4x4 labs power steering mounting kit. Price is firm.
78 in process of a 5.3 gen 3/4L60E swap. Just running out of time and space..
FJ bought last year with plans for retirement in a few years. Threw rod after about 50 miles.
The FJ:
no roof
no doors
body is decent. Rear sill needs replaced. Quarters not bad. Bed floor has some rust as well.
nice patina on rest of body
floorboards great shape
new corbeau seats
engine
came out of 2005 suburban (wrecked) 190,000 miles. Had to turn crank 10/10, alignment was good. Have matching ECM and harness (have depinned wiring). ECM not programmed yet. Fuse block for new harness. Bought a TBSS manifold and shaved with DBW throttle body (have original manifold, TB damaged) one coil broke.
New pistons/rod bushings, cylinders honed standard rings.
new oil pump, new BTR cam 206/212, cam brgs, heads rebuilt, new Camaro oil pan for clearance,
Transmission
bought from a muddper with the AA adapter. He bought from California no real history planned on going through before install. I did buy the vss reluctor ring from AA.
extra parts:
AA transfer case mounting
AA engine mounts
I do have more pics I can email if interested..
asking $16,000
In process of moving and not enough time or space and need to let it go.
I have added new OME springs, 4x4 labs power steering mounting kit. Price is firm.
78 in process of a 5.3 gen 3/4L60E swap. Just running out of time and space..
FJ bought last year with plans for retirement in a few years. Threw rod after about 50 miles.
The FJ:
no roof
no doors
body is decent. Rear sill needs replaced. Quarters not bad. Bed floor has some rust as well.
nice patina on rest of body
floorboards great shape
new corbeau seats
engine
came out of 2005 suburban (wrecked) 190,000 miles. Had to turn crank 10/10, alignment was good. Have matching ECM and harness (have depinned wiring). ECM not programmed yet. Fuse block for new harness. Bought a TBSS manifold and shaved with DBW throttle body (have original manifold, TB damaged) one coil broke.
New pistons/rod bushings, cylinders honed standard rings.
new oil pump, new BTR cam 206/212, cam brgs, heads rebuilt, new Camaro oil pan for clearance,
Transmission
bought from a muddper with the AA adapter. He bought from California no real history planned on going through before install. I did buy the vss reluctor ring from AA.
extra parts:
AA transfer case mounting
AA engine mounts
I do have more pics I can email if interested..
asking $16,000
Last edited: