Parting Out 66 FJ40 FST Part out or sell whole (1 Viewer)

Joined
Sep 24, 2009
Messages
3,820
Location
Cologne, MN
I have a 1966 FJ40 FST that I am looking to move. I would prefer to sell whole truck, but will part out if I cannot sell it whole.

Back half of the tub is rusty, the front not too bad. Floors have a couple holes. Nice bib and hood. Windshield is not cracked or chipped- but I don't think it is OEM. Windshield frame is good, albiet the spotlight. The frame has surface rust, but no holes. Minimum swelling on the rear cross braces. It would clean up very nicely. Tailgate is real straight, with no holes at all in it. Has all the tailgate hardware (I'll straighten the right latch :)) Front fenders are not rusty, but they are OEM and just need some body work. Looks like everything under the hood is there and OEM, except for the fan shroud. All the shields are in place, and look pretty decent.

I fired it up, and it definitely needs a tuneup, but the oil pressure sat at about 12 o'clock--amp guage worked. Didn't smoke at all---I think I may warm it up tomorrow and run a compression test. I don't think there are very many miles on the old 135. Not sure on the speedo, but it is easily tested. No brakes, so it does not drive. Haven't tested the wiper motors, but I can. Nice Sears lockout hubs!

If I don't sell it this week, I will part it out. Have title--even the date of manufacture plate is still there. T66

$2600
































 
Last edited:
Joined
May 12, 2013
Messages
665
That is a beautiful cruiser.

I saw it on Craigslist last week for $1500.00.

Way to give your fellow Mudders a break!
 

woytovich

Science...
SILVER Star
Joined
Sep 2, 2003
Messages
12,674
Location
Metro NY
If this were within a couple hundred miles of me I'd be seriously tempted. Good luck with the sale...
 
Joined
Sep 24, 2009
Messages
3,820
Location
Cologne, MN
This is moving to part out. Will be starting a new thread after I provide parts to those that already requested parts
 
Joined
Jul 11, 2013
Messages
1,318
Location
California
I'm interested in the carb , the hub caps , front window handles and hooks , the clips for the jack rod holder or starter rod holder .also the two round hooks on the front dash on each side driver/ passenger.

Thanks Casey
 
Joined
Nov 17, 2013
Messages
61
I would love to have the front grille assembly with lights ( if you can ship) I want to make a head board for my son. I would hang it just like it is> love it. thank you
 

Users who are viewing this thread

Top Bottom