60 In action

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 7, 2007
Threads
8
Messages
71
Location
Ouray Colorado
I always like seeing pics of your rigs in action so I thought I'd post some of mine from last weekend. Funny but none of the j**ps :rolleyes:wanted to cross:steer:
Attachment1.webp
Attachment2.webp
Attachment3.webp
 
You didn't see the bridge? :flipoff2:
 
Bridges! We dont need no stinking bridges!

Actualy the bridge did not look that safe boards loose and everything' plus the river was just calling out to me:grinpimp:
 
Was that on Imogene?

Good eye. yep it's Imogene right at Camp bird road this weekend Im thinking of doing big bear if they got it open yet.
 
Cool thread,

Here is a couple of mine at the RUBITHON this year.

cheers
chappy
100_4093 resised for mud.webp
100_4135 resisded for mud.webp
DSCN1007 resized for mud.webp
 
Did you do any mods to handle the water. It looks like the intake could have easlity gotten some water in it.

Mark
 
Just a heads up there is a thread here for deep water crossing pics. You should post that picture there. Awesome picture I love the 60 series
 
I always like seeing pics of your rigs in action so I thought I'd post some of mine from last weekend. Funny but none of the j**ps :rolleyes:wanted to cross:steer:

Is you distribuitor sealed? hoy does it hdandle the situation? because here in Venezuela we do a lot of river crossing and may times mi distribuitor have let me down crossing rivers because it gets wet and the truck turns off!! I will be sealing my distribuitor soon, i'll post the process.

Nice pics by the way!
 
Good stuff, except for straying from the trail. Colorado is always amazing!

Actually the crossing is part of the trail. You have a choice the river or the bridge(with loose members and all)

Is you distribuitor sealed? hoy does it hdandle the situation? because here in Venezuela we do a lot of river crossing and may times mi distribuitor have let me down crossing rivers because it gets wet and the truck turns off!! I will be sealing my distribuitor soon, i'll post the process.

Nice pics by the way!

I have not done anything to the Dizzy but replace the rubber boot that was missing, and some silicone grease around the wire boots and drier hoses. the only time I ever had a problem was before I got the distributor boot. But I have found its best to leave the engine run for 10 to 15 mins after(kinda hard to re start):bang:
 
Cool thread,

Here is a couple of mine at the RUBITHON this year.

cheers
chappy

How'd your SUA 60 on 33" AT's do? I'd love to do the Rubicon, but don't see myself building up my truck much more than it is anytime soon...

The internet would have you believe that you need 40"+ swampers, 5 lockers, exocage, and a total disregard to damage to set foot on the trail...
 
Fairly static, but I had to drive to get here...
 
Last edited:

Users who are viewing this thread

Back
Top Bottom