i pulled the rear shackle hangers and flipped them around, what a PITA... I need to invest ina torch... anyway, I used the two rivet holes and ran two 3/8 bolt thru where the rivets were to get an idea of my shackle angle. my question is, with out the axle mounted with no weight on the springs, my shackle angle was 70* with the bottom of the shackle pointing to the front of the truck, or if you were looking at it from the side, ( / ) I've read about this and it seems most people just flip the shackle hanger and call it good. I also know it will move with weight on and the lower portion of the shackle will point to the rear of the truck ( \ ) with a totally verticle shackle being 90* or ( | )
other option is just to wait till its all together and adjust as necessary. any thoughts?
Mike
other option is just to wait till its all together and adjust as necessary. any thoughts?
Mike