4wd indicator switch

[bigfj62]

My 60 is a January 82 build date. I just finished up rebuilding the split case. I have a light on the dash for 4 wheel drive but the case is absent of any switch or wires. There isn't even a hole for the switch. I have attached a picture of the side of the front out output housing where it should be

(not the best but all I have right now).

Can someone explain to me where the light gets a signal 4 wheel drive is engaged?? I am baffled.

 

[8B2 Fiend]

See that connector that goes to sensor next to frame on pass side?

 

[bigfj62]

See that connector that goes to sensor next to frame on pass side?

.
I am guessing you didn’t read or look at my picture. I don’t have that switch on my t case or the hole to put one in. I think I have solved the dilemma though. Looking at my dash after work again, I do not see the green 4wd light. It must have not come on early 60s.

 

[tmxmotorsports]

Here ya go

 

[tmxmotorsports]

See that connector that goes to sensor next to frame on pass side?

thats nice and clean right there nice resto!

 

[bigfj62]

Here ya go

View attachment 1794063

View attachment 1794064

Please read before you comment. Thanks for the help but I don’t have what your pointing out on my case.

 

[tmxmotorsports]

I read and looked at your post this tcase is from a 84 fj60. So you have a spot in the dash that says 4x4

 

[tmxmotorsports]

Your picture taking skills need improvement

 

[bigfj62]

I agree it’s the only picture I have in phone. I’ll take a good picture soon.

Your picture taking skills need improvement

 

[bigfj62]

So......

 

[mwebfj60]

1983 cluster below...4wd indicator is bottom right and choke is bottom left.

Is the bottom left on the 1982 choke or are you saying that’s the 4wd indicator?

 

[8B2 Fiend]

.
I am guessing you didn’t read or look at my picture. I don’t have that switch on my t case or the hole to put one in. I think I have solved the dilemma though. Looking at my dash after work again, I do not see the green 4wd light. It must have not come on early 60s.

Really dude? I showed you where the sensor is. That’s it.
Next time don’t worry I won’t read one of your inquiries.

 

[bigfj62]

Really dude? I showed you where the sensor is. That’s it.
Next time don’t worry I won’t read one of your inquiries.

I am sorry guys. I am thankful for your responses. I guess I wasn’t clear enough with my original post.

I know where the switch should be.......but it’s not. I was looking for another location it might be on an 82 or it just doesn’t have one. I have come to the conclusion the 82 doesn’t come with a light.....just have to look at the floor and see the shifter.

 

[bigfj62]

1983 cluster below...4wd indicator is bottom right and choke is bottom left.

Is the bottom left on the 1982 choke or are you saying that’s the 4wd indicator?

View attachment 1794273

When I originally posted I was pretty confident it had a light. I am thinking the 82 didn’t have one.

 

[boerboel313]

Well, at least you guys solved the reason my 4X4 light doesn’t come on any more. I think my wires are cut. Is it possible to order a new sensor and wire loom? Or maybe it’s easier to just rewire it.

 

[bigfj62]

Well, at least you guys solved the reason my 4X4 light doesn’t come on any more. I think my wires are cut. Is it possible to order a new sensor and wire loom? Or maybe it’s easier to just rewire it.

Well I’m glad this thread wasn’t totally useless. I would check with Toyota or some of the parts dealers here on mud to see if it is available still. If not......you may be able to find it used.

 

[bigfj62]

Just found some used ones on eBay and cruiserparts.net.

 

[boerboel313]

Just found some used ones on eBay and cruiserparts.net.

What did you use as search title?

 

[bigfj62]

Fj60 4 wheel drive indicator switch on google

What did you use as search title?

 

[bigfj62]

I would search wanted in classifieds here in mud too.