it's worth it to me. design and construction are both nice
4plus Products (1 Viewer)
- Thread starter Bear Lake Cruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
a week to ten days is typical
can we get a group buy?
There's a Mud member discount, hit Dave up!
Will be on my list after I replace my gas tank
It would be if the rig could move. No tank means it's sitting at the radiator shop.
Bear Lake Cruiser
SILVER Star
- Thread starter
- #49
Rear bumper is sweet, I have one on both my 40 and my 60 but no pictures of it and it is in CA with Georg now getting an H55. Dave (LCWizard) took pics of it though.
where is the link to order this fabulous bumper?
Excellent bumpers both front and rear. Solid construction and clean welds. He has thought out the bumpers function very well. Very stoked! and Dave is a super solid guy.
4 plus is good stuff ..I bought the rear bumper /tire / jerry can carrier 3 years ago thru Manafre but picked it up at his shop in Miami AZ. One complaint though. The powder coat paint has been peeling off in large peices since the first AZ winter season. I have been touching up with a wire brush and and rattle can. What sort of pre- treatment do you use prior to painting / powder coating your products ?
Does anyone have install pics for a 4Plus rear bumper/carrier? How about pics of a hi-lift mounted to the basket?
Happy to have received my bumper, but struggling a bit to make sense of all the pieces. Got an email in to Dave, but wondering if anyone here documented their install..
Happy to have received my bumper, but struggling a bit to make sense of all the pieces. Got an email in to Dave, but wondering if anyone here documented their install..
John McVicker
SILVER Star
Don't have his bumper but I believe the install instructions are on his website.
John
John
Basket bolts on to the swing out with the flat uprights with the license plate bracket facing out. More pics later if needed
Yeah, got that part. Thanks for the pics, too....There's a small, flat bar that was included with the hardware for the basket - not sure where it goes though as the bar is shorter than the spacing between the holes on the basket. Any thoughts on that? Also, I've been looking at the pictures of the latch cam posted here, but still can't quite figure it out. Does the cam bolt screw into the threads on the main part of the bumper? Does the nut on the cam bolt get adjusted so that it's between the bumper and the swing arms, or between the swing arms and the latch handle (if that makes sense)?
