3D printable ash tray blank CAD file (that you could use for switches, or whatever you want) (2 Viewers)

[Obioban]

I'm working on a project to mount a magsafe puck on this, but once I modeled a file that could replace the ash tray (and it's frame) I thought other people might have other uses for it (switches, mounts, etc).

So, sharing here.

I'll update with the magsafe version when it's done, if anyone wants to print that as well.

This file replaces the ashtray, and the housing it slides into. You just remove, and slide this in-- rides in on the stock tracks and clicks in with the stock latches, no hardware required.

All 3 attachments are the same file, just different formats depending on what's useful to you.

Dropbox

www.dropbox.com

Dropbox

www.dropbox.com

Dropbox

www.dropbox.com

 

[ndg]

Here's a screenshot:

 

[Obioban]

I'll drop a picture of it in the dash bit later this morning.

 

[Obioban]

Pretty low print quality and using my cheapest/ugliest filament (as I'm currently rapidly iterating it), but from the front it follows the contours. Obviously a blank panel isn't overly useful-- sharing this so people can put whatever they want here.

 

[Obioban]

From the back, you can see it slides on the factory tracks, clips to the factory clips, and centers on the factory centering tab. You can ignore those half rings/clips on the back, they're not in the model I shared-- part of my MagSafe project.

 

[Obioban]

Removed the cigarette lighter from the dash, and came up with this contraption to keep it from loosening behind the dash and prevent any shorts

Tray with MagSafe puck

150W GAN charger that should be able to power ~anything to replace the cig lighter I removed

With my Pro Max sized iphone

With my wife's normal size iPhone.

All on ignition switched power, so it can't drain the car battery.

I'll upload the files to all the above shortly.
In terms of not 3d printed parts...
Magsafe puck
GAN charger