Wanted 2H / 12HT oil filter bracket gasket

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 28, 2007
Threads
484
Messages
2,929
Location
Portland OR - USA
Im looking for the gasket between the oil filter bracket and the main oil cooler outer cover. Maybe someone has a leftover from a kit.

Not finding many available options for this gasket besides SOR and cruiser parts (one overpriced, one may never show up)

Thanks
 
Ordered from cruiserparts and received what they have pretty quick. Unfortunately it doesnt work for me.

If someone needs an early 2H gasket I have one for you.
 
Ordered from cruiserparts and received what they have pretty quick. Unfortunately it doesnt work for me.

If someone needs an early 2H gasket I have one for you.

The gasket is 15691-68030 and is only available with the engine overhaul kit for either a 2H/12H-T. It is not available separately from Toyota anymore.

HTH.
 
This may not help or could be a wild A.. chase

Would be a pia but you could make one from gasket material
 
This might not be too late after reading the articles in this forum. It did give me nightmares as my oils was leaking out from where the oil filter bracket mate with the oil cooler housing.
IMG_20191112_091230.jpg

After cleaning the bracket, I placed a thin bond paper over the surface where you place the gasket
IMG_20191112_093153.jpg

Press the paper with your finger to get an impression of the surface of the bracket.
IMG_20191112_091406.jpg

I then placed a carbon paper over the Vellumoid gasket
IMG_20191112_094208.jpg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom