2022 GX460 Camp/Ski Rig (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 31, 2021
Threads
1
Messages
419
Location
Los Angeles, CA / Reno, NV
Guess it was time I wrote down what this thing has on it. I've owned this thing since new, when it was delivered to the dealer with 3 miles on it in August 2021 . It's currently at 61,000 and about to put another 1,000 on it this weekend. I've wanted an LC for a while but as prices spiked during Covid, it actually made more sense to purchase a 460 new. It's also had a myriad of wheels on it because I can't make up my mind.

IMG_7610.jpg

PXL_20210907_162314352.jpg


It has the following on it:

Drivetrain/suspension/mechanical
  • Dobinsons IMS (about 2 inch) with C59-302/C59-327 springs
    • It sits a little rear high because it's apparently lighter than I thought it would be
  • Titan 7 T-AK2 17x8.5-8
  • Kenda Klever AT2 P285/70/17
  • Perry Parts F/R bump stops
  • Dr. KDSS stuff
    • KDSS switch
    • Front sway bar brackets
    • Rear sway bar spacers
    • Track bar correction kit
    • Sway bar collars (not yet installed)
  • Body mount chop
  • Victory 4x4 tow hitch plug relocate
  • Victory 4x4 compressor mount
  • Hayden 678 transmission cooler on a Mountain passes offroad bracket
  • ARB full skid plate
  • Fumoto oil drain plug
  • Treaty Oak style front recovery points
  • Rear diff breather
Body/stuff attached to body
  • JW offroad rear tire carrier
    • It's the one that bolts to the door. Lasted in good shape for about a month until someone drove into the back of it. It's pending replacement with the door lol
  • Bison Gear rear table
  • Prospeed Rack full rack
  • CVT 270 degree awning, 2.3m, driver side with Prospeed mounts
  • Thule half width ski box
    • Not sure which model - it's old and was purchased off Facebook marketplace
  • Diode Dynamics SSC2 Sport flood
    • Rear chase lights
  • Auxbeam 8 button switch
  • Pedal Commander
  • Front bumper cover cut
  • Removed third row seats
  • Homemade rear deck/box with 60% sleeping platform
  • Homemade rear full width sleeping platform
  • Replaced interior lighting with LEDs
  • Lexus all weather floor mats
  • Ecoflow Delta 2
  • IceCo VL35ProS fridge
IMG_7044.JPG

IMG_4287.jpg
IMG_4172.jpg
 
Collectively, we've also done some other automotive things. Currently in the stable are these two:

IMG_2467.jpg


along with:
  • 2022 Tacoma
  • 2020 Model 3
  • 2019 Subaru Forester
 
I dig it. 😎 Do you have a pic of the sleeping platform deployed? I'm considering something similar with my rear cargo area.
 
I dig it. 😎 Do you have a pic of the sleeping platform deployed? I'm considering something similar with my rear cargo area.
I don't have a picture of it completely finished, as we never got to go to the trip it was intended for, but here's a mostly complete one. My girlfriend and I aren't tall (5'9" and 5'5") so it works for us. We're also used to sleeping in tents so it was enough room, I think.

IMG_1193.jpg
 
I don't have a picture of it completely finished, as we never got to go to the trip it was intended for, but here's a mostly complete one. My girlfriend and I aren't tall (5'9" and 5'5") so it works for us. We're also used to sleeping in tents so it was enough room, I think.

View attachment 3895331

I'm 6' on the dot and I've measured about 6'1" worth of horizontal length from my driving seating position and the rear barn door. Cutting it close I know. I could move the drivers seat forward a bit and have a little extension to give a little more room I suppose. I do plan on removing the entire 60 portion of the 2nd row so perhaps adding a bit of an angle to squeeze out another 1-2" may be just enough.

Your pic helps me visualize it. Thank you.
 

Users who are viewing this thread

Back
Top Bottom