For Sale 2 FJ40 projects East PA

Near Allentown, PA

Have PA titles for both but they are in parts.

Here is the story,

Started as a 1979 fj40 I drove on the road legally, clean title.

It ran great, has a new fibrrglass tub, but frame was rusted bad and it wouldnt pass inspection

So I bought a 1972 frame and totally resurfaced it.

In the middle of this I bought a 1975, clean title, with original 25k miles,
which was in good shape, but had a 400 Pontiac motor/th400 trans swapped in
it. The seller kept the motor, but I got everything else.

I then bought a similar pontiac 400, bored .060 over. Now my plan was to use
the fiberglass tub on the 1975 frame using the 400/th400. So I resurfaced
the frame of this one, because it had the 400 motor mounts already in place,
but never got to reassemble the truck.

I have alot of new parts, like wiring harness, SS brake lines, tube bumpers,
roll cage, plus 2 vehicles worth of original parts and interior. Enough to
build 2 cruisers, one modified and one stock. That was the plan anyway.

But plans change. I ended building a Corvette powered 93 Rx7, so I found
little time for the FJ, and recently found out we are expecting our first
child.

If you are looking for a project, there's alot here. I'll sell it all for
6500.

 

[Michael Hanson]

Might be easier if you list by nos. whats for sale. MIke

 

[toomanytoyzz]

The 72 frame wouldn't have worked with the 79 fiberglass tub without some modification. It would also become a challenge since the tub is fiberglass.

I wouldn't be interested in the entire lot, but would like to see pics of the 75 if you are willing to sell seperate. I'm about an hour from Allentown. My email address is 77lubr@gmail.com.