So my power steering paperclip rusted and it was decided to bypass it. This is what I did
now I’ve raised the front filled the reservoir and the wheel turns fine in the air. when the car is on the ground I can’t move the wheel an inch.
somone suggested there’s not enough back pressure in the system after bypassing the paper clip so I put a smaller hose inside the factory one and it made no difference.
anyone please have any ideas?
now I’ve raised the front filled the reservoir and the wheel turns fine in the air. when the car is on the ground I can’t move the wheel an inch.
somone suggested there’s not enough back pressure in the system after bypassing the paper clip so I put a smaller hose inside the factory one and it made no difference.
anyone please have any ideas?