1994 FJZ80 getting 5.3L & 4l60

[ssyork]

Added this blue sea USB plug where the original cig lighter was. Just had to scrape the hole out a little bit and it slid right in.
Missed a few days working on the yota building this table for the wife too. Beer ice buckets in the middle. With a drain valve underneath.

 

[ssyork]

Nothing to exciting, but I put some caps on the tranny cooler part of the radiator, didn't want fluid dropping out.

- 6an fit.

 

[ssyork]

Had to make the Toyota fan shroud a little bigger to run the Chevy fan.

 

[ssyork]

So I know it's been quite a while since I have updated anything. The last 6 months have been a little crazy around my house. No need to list all my excuses here though! Lately I have been knocking some stuff out again though. I got front and rear ARB'S installed, the front end seemed to take forever. The ARB was the easy part. The front seals were out and there was birf soup from one end of the housing to the other. Including all over every bolt and piece of the knuckles. I even power washed them on the way home when I bought it. I have at least 15 hours into just cleaning, let alone disassembly & assembly. Also got the low gears & part time kit in the t case, the main section of the front 4x4labs bumper fully welded, ARB compressor mounted and a blue sea box mounted with a few things ran to it. Ordered an intake elbow, lower coolant hose and exhaust last week too. Went with a dynomax round, 2 1/2" from headers back, both going into one. I was really hoping to be driving it by now so I could have all the kinks worked out forat the end of the month. Just not going to happen though, so will have to take the super duty. It will be ready for the summer though for sure. Here are the few pics I have taken along the way. Lately it's been cold enough in the garage though that my phone screen won't turn on to take pics. So here is what I have KOH

 

[ssyork]

One more

Sent from my SM-G900V

 

[ssyork]

Someone ask in another thread about ko2 tire height, thought I'd put it up here too. These are the 315's, with 45 psi, nitrogen in them, not mounted on truck. Measure right at 34.5" tall.

Sent from my SM-G900V

 

[FloatingAum]

man good stuff on this build! what's the follow up? I'm sourcing parts right now for a 93 that i just bought and want to put lq9 into.