1993 Land Cruiser - Aftermarket Keyless Entry (1 Viewer)

[ddfx]

First off, hello!

I actually own a 1993 Land Cruiser that has been kept in relatively good condition. The only pressing issue with it now is that the driver side door lock mechanism is getting shaky again from overuse.

I then decided to purchase a Bulldog Security KE150 Keyless Entry system to hopefully alleviate stress from the doorlock. (I actually lock/unlock the doors upwards of 20x a day.)

But before I even tear in to anything, or rather, before I even begin, I want to know what I am doing. The documentation on this product is sparse.

However, it seems I really only need to make 3 "connections"...

12V CONSTANT - BLACK & WHITE/RED - IGNITION SWITCH HARNESS
POWER LOCK - BLUE/BLACK - IN DRIVERS DOOR HARNESS
POWER UNLOCK - BLUE/YELLOW & BLUE/ORANGE - IN DRIVERS DOOR HARNESS

Unfortunately, I have not been able to find these wires or even a way to access them. If someone could show me the right information on where these wires are located exactly and more importantly, how I can access them in a 1993 Land Cruiser, I would be very appreciative.

I will be grateful of any and all suggestions, and appreciate you reading this.

Thank You

 

[firetruck41]

Welcome!
You have posted in the pickup/4runner section, try going to the 80 series forum (yours is an FZJ80) and repost for some help relating to your problem.

 

[ddfx]

Heh, that would make sense. (I didn't find a 90s forum so I just posted here.)

Thank You, I will repost this thread.