1993 1HZJ77 - Mechanic asking for parts number / usa sourcing - please help (1 Viewer)

[hiphip]

Hi,
I've got my newly imported 1993 1hzj77 Land cruiser in the shop for the 1st time to do some preventive basic maintenance/upkeep. They are asking for part numbers for an 'automatic trans filter and gasket kit'? I've searched MegaZip and don't know if I'm looking at the right parts. Also, I would love to get this along with an OIL FILTER as fast as possible, does anyone have any suggestions for sourcing these parts in the USA?

Thanks in advance! I'm 100% in over my head, but sincerely appreciate the members here being so helpful, you all have been amazing!

 

[FJ73Texas]

Contact cruiser outfitters. A phone call or email with them get you squared away.

@cruiseroutfit

Cruiser Teq | Land Cruiser Specialists Powered by Cruiser Outfitters - https://cruiserteq.com/

 

[Broski]

You can also try Partsouq.com.

 

[OGBeno]

Hi,
I've got my newly imported 1993 1hzj77 Land cruiser in the shop for the 1st time to do some preventive basic maintenance/upkeep. They are asking for part numbers for an 'automatic trans filter and gasket kit'? I've searched MegaZip and don't know if I'm looking at the right parts. Also, I would love to get this along with an OIL FILTER as fast as possible, does anyone have any suggestions for sourcing these parts in the USA?

Thanks in advance! I'm 100% in over my head, but sincerely appreciate the members here being so helpful, you all have been amazing!

View attachment 3734022

You can get all of this stuff from any Toyota dealer in the US.

Oil filter PN: 90915-30002
Drain plug gasket: 90430-12031

The transmission does not have a pan gasket. You use form-in-place-gasket to seal the pan to the body of the transmission. Use the Toyota stuff: 00295-01281

You will need the o-ring for the pan where it mates with the dipstick upper tube: 90301-09173

The oil strainer for the valve body is not replaced. It is metal mesh filtration system. You remove it, clean it out and re-install it. You will need the gasket for that assembly: 35339-60020

All of these parts are available anywhere in the US from a Toyota dealer.

 

[hiphip]

You can get all of this stuff from any Toyota dealer in the US.

Oil filter PN: 90915-30002
Drain plug gasket: 90430-12031

The transmission does not have a pan gasket. You use form-in-place-gasket to seal the pan to the body of the transmission. Use the Toyota stuff: 00295-01281

You will need the o-ring for the pan where it mates with the dipstick upper tube: 90301-09173

The oil strainer for the valve body is not replaced. It is metal mesh filtration system. You remove it, clean it out and re-install it. You will need the gasket for that assembly: 35339-60020

All of these parts are available anywhere in the US from a Toyota dealer.

Dude thank you so much! I'm sincerely grateful for all your help, this community is the best.