Parting Out 1993-1994 FZJ-80 One with Lockers (2 Viewers)

[Mike Knorr]

Don't have any hoods left. Your better off sourcing that local I would have no idea on shipping a hood even if I had one. Even a fender is cost prohibitive to ship.

 

[Mike Knorr]

Still have some parts left from these trucks
Good 91-94 grill.
two 1994 Engine ECU's
Two HVAC control panels
Lots of computers, relays, misc electrical parts available
The motor is out. Had a rod knock but still ran. Lots of good bits and pieces on the motor still.
Good transmission and transfer case available.
Driver side plastic mirror bolt cover piece
Lots of brown plastic pieces in good shape
Complete brown dash assemble in great shape
Have one good passenger side front door (RH) in Champagne
One good inner fender, U think it is the driver side one (LH)
Two drivers side headlights
Grey two level factory center console - beat up but still useable.
Engine wiring harness

 

[Mike Knorr]

Grill on 1993

 

[Mike Knorr]

Gotta put this part out on hold for a week or so. Going to be traveling and won't be able to respond to parts requests during that time. I'll post up when I am back and resuming parting out.

 

[ceylonfj40nut]

Are the diff lock actuators available? If so can you PM me with $?

 

[Mike Knorr]

Are the diff lock actuators available? If so can you PM me with $?

Long gone.

 

[YoterGuy]

How about the cylinder head shipped to 30534?

 

[t100boy]

How much for the ecu shipped to 74105 please?

 

[Mike Knorr]

How much for the ecu shipped to 74105 please?

$100 but it will be next week till I can ship it.

 

[Mike Knorr]

How about the cylinder head shipped to 30534?

Make offer but you might be better off sourcing locally as shipping will be expensive. Several guys in GA parting rigs that may have what you want.

 

[baldilocks]

Is the exhaust system rotten? I’d like the two flanges off the down pipes that mate the down pipes to the cats. The flanges only, cut off with about an inch of pipe.

 

[RustyLC]

Do you have a center diff lock switch? Mines a '96 so I need the rectangular, non-curved one.

Do you have a beige drivers visor?

95476

Thanks!

 

[Mike Knorr]

Do you have a center diff lock switch? Mines a '96 so I need the rectangular, non-curved one.

Do you have a beige drivers visor?

95476

Thanks!

Don't have either of those items.

 

[Mike Knorr]

Is the exhaust system rotten? I’d like the two flanges off the down pipes that mate the down pipes to the cats. The flanges only, cut off with about an inch of pipe.

The exhaust system is rotten on the trucks.

 

[FJ80Levi]

Do you have the plastic piece that the visor clicks into that attaches to the headliner in brown?

Would you be willing to ship a single wheel (no tire)? If so, how much to 77551?

 

[Mike Knorr]

Don't have the visor pieces. They were sold already. All the spare land cruiser wheels have been sold.

 

[Mike Knorr]

Here are the parts that are left:
|Good 91-94 grill.
two 1994 Engine ECU's
Two HVAC control panels
Lots of computers, relays, misc electrical parts available
The motor is out. Had a rod knock but still ran. Lots of good bits and pieces on the motor still.
Good transmission and transfer case available.
Driver side plastic mirror bolt cover piece
Lots of brown plastic pieces in good shape
Complete brown dash assemble in great shape
Have one good passenger side front door (RH) in Champagne
One good inner fender, drivers side one (LH)
Two drivers side headlights
Grey two-level factory center console - beat up but still useable.
Engine wiring harness

 

[Mike Knorr]

If you are in the Denver area I will be heading out there on August 8th. Perfect time to buy that perfect brown dash and get it to Denver for cheap. Or any other part for that matter.

 

[SNLC]

Looking for black steering wheel horn buttons.

Cheers

 

[leitev8]

Do you have a front corner light, passenger amber color? If not I’ll take a pair of clear ones.