I'm tossing around the idea of selling my cruiser. I recently purchased a truck and haven't been driving the cruiser much at all. Would like to see her go to a good home. List of mods below. I have upgraded her with lots of parts from the vendors here on MUD and I love this site and all the tips and tricks I have learned from it. Any who, here she is.
4 new Hella halogen headlights
New wiring harness for the headlights to improve brightness of the lights
4 Runner brake calipers to improve stopping power
New high performance rotors
New exhaust
2.5 inch heavy/heavy Old Man Emu Lift kit with new leaf springs, anti-inversion grease able shackles, and steering stabilizer
Stainless steel brake lines
555 OEM tie rod ends
Full front axle rebuild with all OEM bearings, races, and Marlin Cruisers HD axle gaskets
Stainless steel battery tray
Optima Yellow Top Battery
Hella Super loud Horns
ARB Front Winch Bumper
Custom made rear bumper with ARB D-rings
Extended Sway bar arms for better handling
Pioneer DVD system with all new speakers and 4 channel amp
Dynomat entire cruiser, floor board as well as interior of door panels
All new upholstery, seats, door panels, and carpet/pad
Custom cut floor mats covering front, entire backseat floor board, and entire cargo area
All windows tinted
Hella Driving lights mounted on ARB bumper
Transmission cooler added
All ground wires replaced and upgraded to marine quality and a larger gauge
All interior gauges converted to LED lights for a much brighter appearance
Wheel center caps powder coated back to original semi-gloss black
Front and rear differentials serviced
Full tune up using all OEM parts
Fuel injectors all flow jetted and cleaned
Transmission serviced
All new door weather stripping and custom double sided weather stripping added to reduce road noise
Brand new KM2s with less than 1k miles on them
I'm sure I left a few things out, but that should be the majority of it.
Things that do not work
Power antenna
Front and rear washer fluid dispenser
The horn button can be hit and miss sometimes
Dash has a crack; I currently have a dash pad on it that looks fine. This is the 3rd dash I have had on it and they all crack after a year, so I just put a cover on it.
She has been ROTM so you can look at me thread
https://forum.ih8mud.com/threads/rotm-maxdaddys-88-fj62.630654/
$15,000 or I might consider a clean 40 send offers over
4 new Hella halogen headlights
New wiring harness for the headlights to improve brightness of the lights
4 Runner brake calipers to improve stopping power
New high performance rotors
New exhaust
2.5 inch heavy/heavy Old Man Emu Lift kit with new leaf springs, anti-inversion grease able shackles, and steering stabilizer
Stainless steel brake lines
555 OEM tie rod ends
Full front axle rebuild with all OEM bearings, races, and Marlin Cruisers HD axle gaskets
Stainless steel battery tray
Optima Yellow Top Battery
Hella Super loud Horns
ARB Front Winch Bumper
Custom made rear bumper with ARB D-rings
Extended Sway bar arms for better handling
Pioneer DVD system with all new speakers and 4 channel amp
Dynomat entire cruiser, floor board as well as interior of door panels
All new upholstery, seats, door panels, and carpet/pad
Custom cut floor mats covering front, entire backseat floor board, and entire cargo area
All windows tinted
Hella Driving lights mounted on ARB bumper
Transmission cooler added
All ground wires replaced and upgraded to marine quality and a larger gauge
All interior gauges converted to LED lights for a much brighter appearance
Wheel center caps powder coated back to original semi-gloss black
Front and rear differentials serviced
Full tune up using all OEM parts
Fuel injectors all flow jetted and cleaned
Transmission serviced
All new door weather stripping and custom double sided weather stripping added to reduce road noise
Brand new KM2s with less than 1k miles on them
I'm sure I left a few things out, but that should be the majority of it.
Things that do not work
Power antenna
Front and rear washer fluid dispenser
The horn button can be hit and miss sometimes
Dash has a crack; I currently have a dash pad on it that looks fine. This is the 3rd dash I have had on it and they all crack after a year, so I just put a cover on it.
She has been ROTM so you can look at me thread
https://forum.ih8mud.com/threads/rotm-maxdaddys-88-fj62.630654/
$15,000 or I might consider a clean 40 send offers over
