Wanted 1987 BJ73 Driver seat bottom - OEM? Does Toyota still sell this part?

[uzj100]

Location

United States

Team - My 1987 BJ73 needs a right hand driver side seat bottom cover and cushion. Does still sell these parts or will I need to find these used? Thank you.

 

[coldtaco]

Covers are NLA, seat cushion I believe are also NLA but you might be able to find some old stock somewhere. You can get newer year covers and cushions but don’t remember what year. You might be able to fit them to your old frames. If you are bored you can look through my build thread and see if I documented this.

 

[LDRF]

Find a good, local, car upholstery person to rebuild it.

 

[joekatana]

NLA but I might have exactly what you are looking for from a LHD so this would be the ps seat in mine

 

[uzj100]

NLA but I might have exactly what you are looking for from a LHD so this would be the ps seat in mine

I will take it. I will send you a PM.

 

[GilaMonsterMoto]

NLA but I might have exactly what you are looking for from a LHD so this would be the ps seat in mine

Hey Joe, I might want one for a right side front seat too, if you have a few lying around. Really just need the seat cushion but if you have a gray 70 series pre-1990 upholstery cover too, Id be interested.

 

[joekatana]

Hey Joe, I might want one for a right side front seat too, if you have a few lying around. Really just need the seat cushion but if you have a gray 70 series pre-1990 upholstery cover too, Id be interested.

You are unfortunately about a week to late , I posted my seats in the fb 7x forum and sold most of my spares .

 

[FJBen]

Hey Joe, I might want one for a right side front seat too, if you have a few lying around. Really just need the seat cushion but if you have a gray 70 series pre-1990 upholstery cover too, Id be interested.

You can swap the bottom seat cushions side to side. You have to keep the covers the same, but that’s what I did a few years ago to give them a little more life.

 

[CRZR45]

I just patched mine. A good upholstery shop should be able to get you going again. My upholstery guy let me do the tear down and rebuilding of the foam so I could learn(he re stitched the wire track and the torn side seam) I did the rest.