1984 FJ60 that needs love

[txwin70]

I have my FJ60 up for sale. Lets start with the bad. It has a sbc 350 in it with a 700r4(not a bad thing)The top end of the motor needs to be looked at. The head gasket is toast. I don't know if the head is warped or cracked, it got hot and i shut it down. The inside needs help. I pulled the old waterlogged stinky carpet out so its got the nasty carpet glue look right now lol. The driver seat needs help, the left side it torn up from the years of getting in and out, but has a seat cover on it so you can't tell. Its not uncomfortable to sit in at all. The pass seat is in good condition but also has a seat cover on it. The rear bench is near perfect. It has an aftermarket sunroof that leaks on the pass side, i have it pretty much sealed with silicone. It has a radio in it, but it works ONLY when it wants too lol. The PO had a TON of ham radios/cb radios in it so there are wires gallore in the rig. I started to clean them out but got overwhelmed.

The good.
Kmar front and rear heavy bumpers
Ramsey 9.5k winch
OME 2.5 lift with shocks
ARB's front and rear(not hooked up but there)
40 gallon expedition tank(the fuel gauge reads wrong)
SBC/700r4 swap(shifter for the tranny was broken this weekend, i am looking for a replacement)
Holley carb(also not on motor took it off to inspect while doing compression test)
Locking center console.
The truck needs some TLC but could make someone a great rig. I am tired of it and am choosing to wheel my 4wheeler. asking $2500 for someone to take it off my hands. I will hear offers and trades but i do have a bottom dollar i need to get for this rig.

 

[DSLTOY]

PM me if it is still avialable. I am looking for a good body for a diesel conversion don't care about the drive train.

 

[wngrog]

Kling-on got it....he is parting it. I got the bumpers. Roger, he will lose the body for sure, but it is a LONG way from TN.

 

[DSLTOY]

it is a LONG way from TN.

How far is it from Elwood, I'll be there for the Family Reunion.

 

[kling-on]

How far is it from Elwood, I'll be there for the Family Reunion.

took me 4 hrs to get to Fortworth to get it... bodys pretty good few door ding type dents the drivers fender and tail gate have the only "real" dents bumpers, axle, drive train and supention are coming off I might be able to put empty axles under it if I can find stock spring... PM me lets talk I was going to cut the corners and rocker out of it and sell em but if you need the whole deal lets make a deal


pics let me know if you need more
http://www.texas4x4.org/gallery/parts-trucks