1980 Fj40

[blemarr]

Does it have PS and if so how much for the box?

 

[Kief]

WS frame? didn't see it dibbed

 

[65swb45]

Looking for some running board supports for a 79+. What is a good time to call you?

I think we talked. Would like to keep the running boards and supports together.

 

[65swb45]

WS frame? didn't see it dibbed

Answered your thread in the wanted post before I saw this. Couple of questions there too.

 

[65swb45]

Does it have PS and if so how much for the box?

Saginaw. Prolly not what you're after.

 

[65swb45]

Radiator core support, brake booster, glovebox door and fuse block are gone.

LXGXFJ, I tried to return your PM; your mailbox is full, and I don't think you want me to call you at 11:17pm.

 

[65swb45]

Instrument cluster is gone. 50amp.

 

[65swb45]

There are a couple of pics of miscellaneous parts on the rig in my tub fs thread. The right front fender and apron are REALLY nice.

Sale pending on front floormat.

 

[65swb45]

DS Hardtop panel, tentatively sold:

 

[65swb45]

hardtop panel left today. Running boards are off. No rust, three broken bolts.

 

[reservefj40]

If you decide to sell the running board supports separately, I'll take them.

Thanks

 

[fogblanket]

i will call if you have these brake parts I can't explain them on the phone like the SOR diagrams do. the diagrams are of the 78' fj40 setup in that the first guy I tried to contact had a 78' I am looking for the 10mm brake fittings. to to build a new brake system in my fj45.

I am looking for some brake parts. I attached some of SOR's drawings of what I need.

I the first pic I need what is highlighted in red which consists of the "t" fitting on the top of the front axle. I don't need any brake parts from the T to each front disk but I do need all the fittings and hoses if possible that go from the T to the MC itself if possible. if anypart looks to fatigued I can do with out but the T is really what I want

in the second pic I need everything pictured if possible.

in the 3rd pic I just need the 'T' fitting that is on the top of the passenger side of the rear axle adn the soft line that goes from the T to the hard line on the frame. if this soft line is in poor condition I can do with out it but I really need the "T" on the rear axle
Attached Images

 

[65swb45]

i will call if you have these brake parts I can't explain them on the phone like the SOR diagrams do. the diagrams are of the 78' fj40 setup in that the first guy I tried to contact had a 78' I am looking for the 10mm brake fittings. to to build a new brake system in my fj45.

I am looking for some brake parts. I attached some of SOR's drawings of what I need.

I the first pic I need what is highlighted in red which consists of the "t" fitting on the top of the front axle. I don't need any brake parts from the T to each front disk but I do need all the fittings and hoses if possible that go from the T to the MC itself if possible. if anypart looks to fatigued I can do with out but the T is really what I want

in the second pic I need everything pictured if possible.

in the 3rd pic I just need the 'T' fitting that is on the top of the passenger side of the rear axle adn the soft line that goes from the T to the hard line on the frame. if this soft line is in poor condition I can do with out it but I really need the "T" on the rear axle
Attached Images

Since I have just agreed to upgrade TWO old FJ45s in my shop to 4Wdisc setups, I am going to have to hang on to those parts. Sorry.

Mark

P.S. It turned out that the running boards had NO STAYS underneath them!

 

[yellowstoner]

Driver's side apron?

Mark, would a '79 apron fit on a '78? If so, do you have a straight driver's side apron?

Thanks,
Dave

 

[65swb45]

Mark, would a '79 apron fit on a '78? If so, do you have a straight driver's side apron?

Thanks,
Dave

No matter, I have two 1978 aprons on the shelf. $50 to your door work? IF so, send me a M.O. and an addy and I'll get it out to you asap.

 

[fjwagon]

How about top reinforment piece located above the amby doors? Got anything like that for my 82?