Parting Out 1980 BJ42

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 8, 2004
Threads
53
Messages
544
Keeping some parts for my resto (axles and engine and transmission mounts) and have sold some other parts already. The rest is up for grabs.

Truck has 178,000 km and has been parked for 16 years. Overheated and the head was pulled to be replaced, but it never was completed. Engine sat open for the last 16 years. Body is shot except for the rear ambulance doors...somehow they remain clean.

PM me your parts requirements.
image.webp
image.webp
image.webp
image.webp
 
I should add that the truck is located in Toronto, Ontario , Canada. Shipping big parts may be expensive, best to pick up big parts.

Thx
 
Ambulance doors are sold.
 
Jumpseats sold
 
Fuel filler door is spoken for, not picked up yet, if it changes I will let you know.
 
Hi gtscotty, I didn't receive a PM from you yet. Send me a PM and let me know what else you need.
 
Do you still have the roll bar? If it is available and has all of the pads I would be interested
 
EDIC?
 
Do you still have the roll bar? If it is available and has all of the pads I would be interested
I have one other guy ahead of you for the roll bar, it is complete and in good shape. There is some primer sprayed on the bottom of each post, roughly 8 inches up or so. The PO primered the inside of the tub after he did some repairs, send me a PM with your email address and I will send you some pics.

Thanks

Adam
 
How are seat belts?
 
DO you have this part: It is a tube that comes from the heater valve to the water pump.
There is a very good chance that I do, I will have to look for it though (I have already pulled the truck apart into a thousand pieces). Send me a PM with your email address and I will send you a note.

Cheers,

Adam
 

Users who are viewing this thread

Back
Top Bottom