1979 Toyota Pickup 4X4 Short Box SOLD!!!
This truck is sold as of 11/15/08. Thanks for the interest. Buyer did not want the frame which may be listed later.
Brian
Selling my 79 Toyota 4x4 pickup. This one has 116k miles on the original 20R 4 cyl. 4 speed. It has power steering, factory CB radio, disc brakes, Asco hubs, and the factory gauge pod in front of the heater. The truck has original paint, everything works, and there is no rust through. The bed has 30 years of minor dings from stuff rolling around in it. The passenger door has a pretty good dent towards the front. The truck has been hit in the front drivers side frame horn area. A local body shop said the frame horn was bent back and wanted $500 to fix it. I passed and have driven it for the last 2 years without any problems. The truck comes with a 1985 long box frame that is straight and rust free. I bought it with the intention of making this truck into a long wheel base. I also have the 1980 2wd truck that I bought for the hood that the buyer can have all or part of. The 2wd is and SR5 model and has the wind-wing doors. It also has a 20R motor and 5 speed. Pretty sure there was a rod knocking when I towed it home and let out the clutch. The tires are 31x10.50s and are in decent shape except for the driver side rear. It had a sidewall puncture and is running a tube. The truck has only been used around town as a parts runner.
$700 for the 1979 4x4, 1985 Frame, and 1980 2wd. (Yes, this is a good deal) Truck is located in Sheridan WY, 20 miles south of eastern Montana and 180 miles west of South Dakota.
If the buyer of the truck does not want the other parts, I will list them seperately later.
This truck is sold as of 11/15/08. Thanks for the interest. Buyer did not want the frame which may be listed later.
Brian
Selling my 79 Toyota 4x4 pickup. This one has 116k miles on the original 20R 4 cyl. 4 speed. It has power steering, factory CB radio, disc brakes, Asco hubs, and the factory gauge pod in front of the heater. The truck has original paint, everything works, and there is no rust through. The bed has 30 years of minor dings from stuff rolling around in it. The passenger door has a pretty good dent towards the front. The truck has been hit in the front drivers side frame horn area. A local body shop said the frame horn was bent back and wanted $500 to fix it. I passed and have driven it for the last 2 years without any problems. The truck comes with a 1985 long box frame that is straight and rust free. I bought it with the intention of making this truck into a long wheel base. I also have the 1980 2wd truck that I bought for the hood that the buyer can have all or part of. The 2wd is and SR5 model and has the wind-wing doors. It also has a 20R motor and 5 speed. Pretty sure there was a rod knocking when I towed it home and let out the clutch. The tires are 31x10.50s and are in decent shape except for the driver side rear. It had a sidewall puncture and is running a tube. The truck has only been used around town as a parts runner.
$700 for the 1979 4x4, 1985 Frame, and 1980 2wd. (Yes, this is a good deal) Truck is located in Sheridan WY, 20 miles south of eastern Montana and 180 miles west of South Dakota.
If the buyer of the truck does not want the other parts, I will list them seperately later.
Last edited:
