1977 FJ40 Quarter Panel Measurement Needed (1 Viewer)

[KStoNCFJ]

Hi all,
I need to weld in some new quarter panels, but my original ones are too rotted for me to get a good measurement for placement of the new ones.

Can any of you who have original rear quarters give me a few dimensions like the attached photo? For the top measuring point, start at the middle of the bend. End at the bottom of the lower lip. Thanks!

 

[spotcruiser]

Roughly, #1= 23-1/4", #2= 9-1/16", #3= 17-7/8"