10th Annual Southern Cruiser Crawl

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Just a reminder! On-line registration ends tomorrow at midnight! registration numbers are ahead of last years at this point so it's gonna be a big un! The raffle is going to be huge! You don't want to miss this one guys!



CRAWL16.webp
CRAWL15.webp
 
CRAWL14.webp
 
crAWL13.webp
 
Just a reminder! On-line registration ends at midnight! registration numbers are ahead of last years at this point so it's gonna be a big un! The raffle is going to be huge! You don't want to miss this one guys!


crawlregistration.webp
 
Only 2 Saturdays left to get your junk fixed before #crawl2014.
Get busy.

crawl12.webp
 
crawl11.webp
CRAWL10.webp
crawl9.webp
crawl8.webp
 
10th Annual Southern Cruiser Crawl


Event Schedule

Thursday, October 2nd:

· Arrival.

· Registration 9:00am till 5:00pm.

· Wheeling.

· Free Burgers & Dog plate provided by Cottonland and prepared by Arkansas Crawlers

· Free Beer sponsored by Louisiana Land Krewesers

· Matt Stell Band at 8:00pm.

Friday, October 3rd:

· Registration opens at 9:00am till 5:00pm.

· Driver Meeting @ 9:00am.

· Wheel all day long.

· Bayou State Land Cruisers annual Gumbofest at 7:00pm.

· Free Beer Friday sponsored by Louisiana Land Krewesers

· Southern Brothers from another Mother Tour with Jason Eady & Adam Hood.

Saturday, October 4th:

· Registration 9:00am till 10:00am.

· Wheel all day long.

· Supper at 7:00pm.

· Raffle to follow.

· Free beer till its gone

· Good times till late night.

Sunday, October 5th:

· Last minute wheeling if you didn’t get your fix.

· Pack up, clean up, go to the house.


ALL DRIVERS & RIDERS MUST HAVE ARM BAND PROVIDED BY PARK TO REGISTER AT COTTONLAND REGISTRATION

ALL VEHICLES MUST HAVE SAFTEY INSPECTION WHEN REGISTERING WITH COTTONLAND

ALL MEALS REQUIRE A MEAL TICKET

FREE BEER ONLY FOR THOSE WITH ARM BAND
 
Lol...
 
Taking Friday off and likely head out there Thursday early afternoon. See everyone in a few days!
 
Man I hope so... Hogs don't play but.... I know that they are not everyone's team....love-hate
 
I hope to be in route as soon as I get the kids to school on Friday morning. Tonight I'm changing my oil to some 40 weight in hopes that she wont smoke everyone out on the trail. Probably throw some "gasket sweller" snake-oil in there for good measure. Also going to crack open the 8274 and see about this locking plate business and install the IPOR skid that's been collecting dust in the garage for months. Maybe I'll get done in time to go grab some Refined Ale and celebrate.
 
I hope to be in route as soon as I get the kids to school on Friday morning. Tonight I'm changing my oil to some 40 weight in hopes that she wont smoke everyone out on the trail. Probably throw some "gasket sweller" snake-oil in there for good measure. Also going to crack open the 8274 and see about this locking plate business and install the IPOR skid that's been collecting dust in the garage for months. Maybe I'll get done in time to go grab some Refined Ale and celebrate.


My money is that maybe 20% of that list gets completed by the time you leave for HS. Just be honest, you are going to dump in a quart of Lucas and roll.
 
Jay--- just shut your face and go to the beach already! Everyone knows October is the perfect time to get a tan and drink salt water.:flipoff2::flipoff2::princess::flamingo:

Oil change--check.
Snake oil--check.
IPOR---check.
8274 locking plate was bent and now it is "unbent"---check.

Didn't get this guy put on because someone told me it used the stock hardware to mount. Nope. I should have known as I was the one who took it off the wreck.:doh:

Slee diff motor skid.webp
 
Jay--- just shut your face and go to the beach already! Everyone knows October is the perfect time to get a tan and drink salt water.:flipoff2::flipoff2::princess::flamingo:

Oil change--check.
Snake oil--check.
IPOR---check.
8274 locking plate was bent and now it is "unbent"---check.

Didn't get this guy put on because someone told me it used the stock hardware to mount. Nope. I should have known as I was the one who took it off the wreck.:doh:

View attachment 948711

I knew my motivation would work. Sorry on the bolts for the actuator skid. It's only been 11 months since it was taken off and my memory isn't that great on that stuff. You are welcome to pilfer the pile of metric bolts I have to get what you need.

Have fun and rip it up.
 
I personally had a great time. Trails were in excellent condition, the Thursday night rain killed the dust, the SCC and Cottonland members were awesome as usual, and I can't wait until next year.

By my count we had around 15 or so active RLC'ers present throughout the weekend. That there is fantastic, folks! Our club sweatshirts came in handy during the chilly nights.
 
BTW. I reserved the bunk house at HSORVP for the 2015 SCC. Sleeps eight and I am the only one so far so you all have a place to crash if you like.
 
I'm prolly KOA bound... Or panther valley...they done scooped up all the cabins...
 

Users who are viewing this thread

Back
Top Bottom