switch

  1. shmukster

    SOLD  PA combination switch 96 80 series

    Title says it all selling the combo switch from a 96 80 series. Truck had appx 165 miles, print on turn signal stalk shows some wear. Airbag had never been deployed. Wiring harness intact this was removed carefully. Price $40 buyer pays shipping. Best to email me shmukter@pa.metrocast.net
  2. pdxtroopy

    Reverse switch wiring h41 to h55f

    Hi folks, we have a HZJ 75 that came from South America. Figured out why the reverse lights don’t work, the reverse light switch coming of the transmission is not wired to anything. From the info plate I know that it originally came with an H41 transmission but a previous owner installed a H55...
  3. B

    Poll question. Which way is up? Fog light switch

    Which way do you think is up? Like it sets in photo or the light bulb on top?
  4. effjay80

    Help with Molex connector door switch

    Thought this would be simple but OMFG. Can anyone explain how the molex connectors on the courtesy door switches pull apart? I see the locking tab but can't figure out how to release the side on the wiring harness to pull the old one out. Two bleeding holes in my index finger summoned this...
  5. alia176

    3D printed switch panels on Etsy for older rigs

    Randomly came across this guy, might be useful for some. https://www.etsy.com/shop/559Designz?section_id=28958960&order=relevance&utm_source=boe&utm_medium=android&utm_campaign=T7tk5KrZRJy01-ZqCDbrnw&utm_content=Toyota%20Switch%20Panels
  6. Bombatron

    O/D switch not latching

    Have any of you guys taken apart the O/D switch on the shifter handle? Am I missing any pieces? My O/D button fails to stay latched when pressed causing my O/D OFF light to be on all the time.
  7. dbbowen

    Combination Switch (turn signals and wipers) Tech. For $25

    I came across a thread the other day about a part called Ultra Power TW35 from rock auto. I looked up the part and its only 25 bucks so I ordered one to check out and heres some notes from it. This is a link to the part, its from an early toyota pickup So the way the combination switch works...
  8. P

    For Sale  Help, new to this vehicle

    What does this switch do?? 1982 FJ40
  9. M

    Hazard switch

    Anyone have knowledge of this type of hazard switch and where its typical location would go? I just found it dangling under the dash.
  10. miller

    Measurement needed-1970 floor high beam switch

    Replaced floor, but did not take measurement for high beam switch. Can someone take a couple measurements.
  11. Malleus

    Wiper multifunction switch: model compatibility

    I need to replace the wiper switches on both my 1995 and my son's 1994. 1994 p/n: 84652-60730 -> NLA, according to Toyota 1995 p/n: 84652-60770 -> available Before I go Japanese part shopping, has anyone replace the earlier part number with the later one? @slow95z do you have either/both of...
  12. nikojo

    FJ62 Brake Light OPPOSITE Switch

    I have a new one for everyone........I recently got another FJ62 and noticed brake lights not working. I replaced brake light switch with new Toyota OEM as I noticed the switch was missing. Plugged right in to original harness with connector and green wires, etc. Now the brake lights are ON...
  13. J

    Where is the A/C Trinary switch Located

    That's it. That's the question. Thanks
  14. turbodog56

    Wanted  ISO Hazard Switch for 1975 FJ40

    Well, just bought this one. Worked when installed and now doesn’t 2 weeks later. ISO another to determine if it’s the switch or wiring. Validated that power goes to the switch, but doesn’t come back out to power the turn signals. Anyone have one of these laying around? Planning to take this one...
  15. S

    Idle Up Switch Addition

    Hey all, I'm new to the community and I have purchased a new to me LHD Land Cruiser Prado and I figured I would share some of my experiences along the way as I begin to modify/perform maintenance on my Prado. Below is so info on the idle up function: I did some digging the other day and I...
  16. nikojo

    Brake Switch Nut Size

    I'm missing one of the jamb nuts that goes with brake switch. Only have one. Does anyone know off hand what the size/thread is of the the nut?????
  17. ATL Cruiser

    4WD Control Switch: 84724-60020 (12V) vs 84724-60030 (24V)

    My 24V 4WD control switch (84724-60030) was starting to bother me in how ratty it looked: Unfortunately, the 24V version is no longer made. BUT, the 12V is still made: 12V 4WD switch: 84724-60020 24V 4WD switch: 84724-60030 In doing research, I found that both switches use the same 12V...
  18. Damcowboy

    I broke a Electrical Connector/switch on the top rear of my transfer Case - Source for a new one??

    Guys, while removing the rear section of my transfer case on my '97 FZJ80 to eliminate the viscous Coupler, the case section fell over and broke a switch (I think that's what it is, it looks like it might be the indicator if the locker actuator is engaged, maybe?). I couldn't get an arrow on...
  19. Sinister

    Tire Question 23 LX600

    Im looking to switch out my tires, does anyone know if there will be any rubbing issues going from the stock 265/55/20 to 275/55/20? It’s such a small change but I’m not sure how tight it is in there now as I’m just coming from a 2011 LC. I don’t have AHC either if that matters. thanks.
  20. C

    '73 FJ40 4WD Light - has a '77 2F, tranny and t-case

    We have a '73 FJ40 that has a '77 2F engine, transmission and T-Case that does not have a 4WD indicator switch or light. I checked SOR, and they do not have one for a '73. Anyone else have a source for this? I spoke with SOR, and she said that that year did not have one. During those years...
Back
Top Bottom