switch

Well, just bought this one. Worked when installed and now doesn’t 2 weeks later. ISO another to determine if it’s the switch or wiring. Validated that power goes to the switch, but doesn’t come back out to power the turn signals. Anyone have one of these laying around? Planning to take this one...

Hey all, I'm new to the community and I have purchased a new to me LHD Land Cruiser Prado and I figured I would share some of my experiences along the way as I begin to modify/perform maintenance on my Prado. Below is so info on the idle up function: I did some digging the other day and I...

I'm missing one of the jamb nuts that goes with brake switch. Only have one. Does anyone know off hand what the size/thread is of the the nut?????

My 24V 4WD control switch (84724-60030) was starting to bother me in how ratty it looked: Unfortunately, the 24V version is no longer made. BUT, the 12V is still made: 12V 4WD switch: 84724-60020 24V 4WD switch: 84724-60030 In doing research, I found that both switches use the same 12V...

Guys, while removing the rear section of my transfer case on my '97 FZJ80 to eliminate the viscous Coupler, the case section fell over and broke a switch (I think that's what it is, it looks like it might be the indicator if the locker actuator is engaged, maybe?). I couldn't get an arrow on...

Im looking to switch out my tires, does anyone know if there will be any rubbing issues going from the stock 265/55/20 to 275/55/20? It’s such a small change but I’m not sure how tight it is in there now as I’m just coming from a 2011 LC. I don’t have AHC either if that matters. thanks.

We have a '73 FJ40 that has a '77 2F engine, transmission and T-Case that does not have a 4WD indicator switch or light. I checked SOR, and they do not have one for a '73. Anyone else have a source for this? I spoke with SOR, and she said that that year did not have one. During those years...

original wires and coupler long gone......... input appreciated as to which of the numbers correspond to what..........

Hi, this has almost certainly been covered in another thread but I can't find it. I have a 1994 1hdt factory triple locked. I've fitted a new genuine switch and it works in high range. But my transmission control relay is different to all the others I can find mine says "computer, 4wheel...

Had a few people on Facebook ask me to do a write up here for this so here goes. This is the overseas gauge cluster for some 60 series. I’m not sure which one it is. It is just an indicator light for your diff locks that goes where your seatbelt light is. You can recreate it by hitting up...

I'm considering adding an adjustable pressure switch to the onboard air compressor. The goal is to have an adjustable air pressure switch so that I could change the cut-off pressure to suite the tires. Let's say it cuts the fronts at 35 and the rear at 40 or 45. This means I can be free to do...

( NEW PRODUCT RELEASE ) NOS General Service / Room Lamp Switch W/ OEM Protection Boot & OEM 2pin Rubber Bullet Kit 84270-60010 / 84270-60020 / 84270-60030 Note : does not include wire itself …. Fyi NOS General Service / Room Lamp Switch W/ SNOW VERSION Insulator Protection Boot &...

Anyone took this switch apart and cleaned it? Mine is intermittent at times and need it working reliably for an obx trip coming up.

Since I've had my truck the passenger side mirror has been inoperable. I manually pushed the mirror into the right spot and moved on. well today i finally got around to pulling the door panel. Found the chassis side 3-pin mirror connector just hanging. found the other end on the mirror side and...

Hey all new to IH8MUD so don't know how to search properly, Im from NZ so for diesel owners we pay for how much distance we drive which is a real pain, unsure if that's the same any where else But does anyone know how I would go abouts installing a switch to flick the odemeter counter on and off...

I want to thank @GH1291 and another member (can't find the thread at the moment) for putting some helpful information about the wiring for the seat heaters on ih8mud. This will be my overview of recovering the front leather seats in my wife's 2005 LX470 with about 250k on it. We ordered seat...

I noticed I would blow a fuse when I would put my 1973FJ40 into reverse. Fuel gauge, the temp gauge and the oil pressure gauge must all be on the same circuit. Only when I would put the stick shift into reverse. Clearly the reverse switch is bad right and sharing a fuse with said gauges?

Looks good, works good. $40 shipped inside the 48 states.

I used a "Momentary-Swith/Pulse-Signal Control Latching DPDT Relay" to bypass the KDSS system on GX470. While first installing it I just used a simple momentary switch to make it work. After confirming it worked, I decided to buy an OEM style CH4x4 switch to "complete" my installation. I cannot...

Mod delete