switch

I’ve been try to find a suitable switch panel solution for my LX 570, but unfortunately, I’ve found no viable options thus far. , I’ve been toying with an idea, though my lack of experience with 3D printing is a hurdle. The concept revolves around swapping out the existing instrumental panel...

Hello All - Anyone know what color the wires are to the ignition switch? 1970 dash mounted ignition switch. I have 4 post cylinder and find 4 wires loose in my field find project. I searched Haynes manual but can't make out the color codes and t does not show positions. Thanks for any help...

The tailgate won’t operate by the tailgate latch, only if I press the button inside the cab. The previous owner was trying to diagnose the key fob not operating at all and he has maintenance records stating at one point the electric locks would only work from the tailgate, but didn’t want to...

I've had some no-starts and intermittent starting recently that usually are resolved by wiggling the gear shift, but that no longer works. I believe I need to replace the neutral safety switch on it. if anyone is parting out or knows where to get one, let me know. Thanks!

I have a 2020 hammerhead 250. New battery and solenoid. When I flip the start switch the dash lights up but the engine does nothing I don’t hear the solenoid click but I tested it on the bench. Could a locked up starter cause this? Any help would be greatly appreciated

Order Up the LEDs from SuperBrightLEDs.com - $2.50 each - Come with Resistors Remove Old Switches using a Flat Bladed Tool like a Skinny Straight Screwdriver Twist out the Bulb Holders. Using a Utility Knife or Tiny Screwdriver Undo the Wires from Bulb Holder Remove Wires from New LEDS - Wires...

Lookin for the switch cover for this wiper motor. 1972 fj40

. https://vintageteqparts.com/collections/everything-else-hardware-fsms-shop-manuals-special-teq-stuff/products/dor-early-fj40-4wd-indicator-switch-refresh-restore-and-updated-rubber-weather-boot-kit-form-everything-you-need been plugging away at this for a bit now , ever since the HERITAGE...

after seeing some various folks asking another $50+ bucks for some retrofit bullet connectors , the cheap blue auto-zone kind ? it was the time to give the 1972 40 series crowd a shot at reality ...... The 9/71-9/72 one modle year only 84310-60023 SWITCH SUB. ASSY, TURN SIGNAL FJ40 , FJ45 ...

Looking for useable switch and domelight, including mount bracket. Pics pulled from internet for reference. Message me if you have one or both sitting on the shelf. Thanks in advance. Mark

Greetings all. In a bid to add a little extra security to my new pride and joy, I was considering options for a simple engine immobiliser. I've read a few threads about how to achieve this, with the simplest, i.e. less error prone, being to but power to the ignition with an immobiliser switch...

Anyone know a person who has hooked up their lockers to this switch?

Been doing this install over past couple weeks. Finally got around to doing the interior part. Relay module: Made a bracket out of stacked pieces of aluminum angle to lower and space out the supplied Auxbeam bracket out into the open space. Mounted the breaker under a bolt that is holding the...

Early turn signal switch. $10. (shipping $20)

it appears on my 77 fj40 that the oil pressure switch under the oil filter is connected to my distrubutor to ground it out if oil pressure goes down.. is this normal?

We very sadly had an accident with our 2000 Land Cruiser & it is totaled. We are crushed. We were attached to that vehicle AND we were using it for certain parts of our business where we could fit everything we needed, for an event, behind the folded forward second-row seats. We had some...

I have a 73 FJ. Why doesthe backup light stay on when running / in the on position??

This switch panel has been on my desk at work for about 10 years when it was removed from a part out. I’m certain the partout was a 3FE so this is an FJ80 panel not an FZJ. $140 shipped to the lower 48.

Hi folks, Has anyone been able to find a USB passthrough that fits into a spare switch on the 1st series 200 ? I could actually do with a dual, but a single would be better than nothing. I am in the process of installing a GROM VL2, and would love to tuck it in as deep as possible while...

When we pull the wiper switch all the way out, it goes off, when you push it in, it turns on. Any ideas as to what would be causing this?