radiator

SoCal No dents or leaks. Trans Oil Cooler $40 mounts in front of radiator, brackets included. (Two Available) AC Condensor $40 (R134 only for 1993-1997) Not compatible with 91-92 or 93 R12 systems. Fittings are slightly different) (Two Available ) Shipping extra. Personal Message Me

Hi Guys Removed the radiator last night to take to a radiator shop and noticed that my heater pipe ('84 w/ AC version) is totally corroded and leaking particulate rust. A while back I bypassed the heater inside the firewall with a single coolant line running from one side of the engine (to...

Aloha, I need a radiator for my 64' fj40 asap I am located in hawaii

Another basic vid of how to replace the rad, water pump and belts. While im sure there are some short cuts i wanted to do this for those with little exp in doing this, just as i did with my oil cooler vid last week :) I did forget to mention in the vid to looses the pivot bolt on the alternator...

I have to replace my leaking copper/bronze radiator and already bought an OEM type aluminum core with plastic tanks. It is a 1998 105 model 1FZFE. Since I live overseas and labor is cheap, I have a guy who can take off the plastic tanks and replace them with aluminum, including changing all of...

Hi there, I live in Las Vegas and lately the temperature has been about 110 F/44 C as always in July. I drive a stock (Canadian) '81 BJ-42 and I noticed that any time the air temp is 105 or more that my 3B just can't stay cool. The temperature keeps climbing and climbing, even when I'm not...

I currently have a leaking radiator in my '88 FJ62. What replacement options do I have? It's been painful to find something that isn't done custom, or doesn't cost $400 or more. I was hoping that I could find something that will increase cooling (I live in the desert southwest), but doesn't...

From 03 on wards the radiator in the 100 series was improved by reducing the fin pitch. Can I put an 03 or later radiator in my 01 LX470? Do they fit the same? Toyota Part Numbers 01, 02 part number is 1640050360 03, 04, 07 part number is 1640050290 Desno Part Numbers (from Rock Auto): 01...

Front seats with headrests, seat frames and center console. $300 Radiator mount / support $70 Metal fuel tank with new sending unit $150 Metal fuel tank shroud / cover $150 Original gauge cluster $200 New poly fuel tank in box $150 If these prices are way off please let me know. I don't...

Hello! New to cruisers. I just bought my first (1973 FJ40). My truck's radiator has a huge section punctured and cut out. Needless to say, it needs to be replaced. My question is-- where should I get a radiator? What's the best place to find a quality radiator (or any engine parts)? Thanks in...

I need a new radiator in my 97. I checked yesterday and the FZJ80 radiators from my dealership are $500 without discounts. The 92-94 radiators are NLA. edit: @beno confirmed the are still available. There are a lot online ranging in price from $100 up to $1,000+. I just wonder what's out...

So I swapped out the radiator. It seems like the engine coolant and transmission fluid both use the fancy radiator I put in, and the air conditioner uses the half-sized one right behind the grill. So what's up with the metal-finned-radiator thing between the real radiator and the ac unit?

ive got a crack on my 2002 4runner's radiator running along the top of my radiator on the plastic ive patched with JB weld for the time being. anyone have any all aluminum suggestions or should i just stick with a koyo like the taco forums suggest? id like to crush the milkshake/ future plastic...

Wondering if I could get this for less than $300? In Portland, OR

Just wondering as I'm restoring this 74 if putting a new aluminum radiator in ($200) vs re-coring the OEM one ($400) would have a negative effect on the value?

What should replace while I'm changing my radiator? Also where should I get said items? Thanks in advance.

Coolant system gave up the ghost this past weekend. Rig is a '97 with 212K miles - pretty much all original parts. I've already torn the radiator out and disassembled a good portion of the front end. Also doing PHH. My question is -- should I just attack the HG as well? Given the amount of...

Hi folks, I'm doing another coolant flush in the coming month before I head on a trip to CO, UT, NV this summer. I know the cooling system is a weak point for Cruisers and I have a temp read out and will be doing the RavenTai mod. My Cruiser has never run hot; I haven't seen the temp go above...

can anyone tell me if these dimensions will be a drop in, no additional parts needed swap? My main concern is the trans cooler fittings swapping over correctly. Please and thank you. It's an aluminum Champion 3-row and I want to make sure I don't need anything else before I order it.

74 tailgate glass 74 rear cargo glass 74 radiator 74 shroud 74 headlight bezels (if i can find them) 74 blower motor (possibly) 74 Wiring Harness (if i can find it) various spedometers various instrument clusters for any F motor aftermarket a/c compressor mount - well made ASIAN FAST FOOD...